UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Oil pump drive pic
https://ukbeg.com/forum/viewtopic.php?f=7&t=18115		 Page 1 of 4
Author:  gibbsy [ 24 Dec 2013 22:17 ]
Post subject:  Oil pump drive pic
Just took this oil pump drive out of my X1 at 34000 miles, I don't think it would have done 35000 miles

Attachments:
image.jpg
image.jpg [ 1.22 MiB | Viewed 1121 times ]
image.jpg
image.jpg [ 1.23 MiB | Viewed 1121 times ]
image.jpg
image.jpg [ 1.22 MiB | Viewed 1121 times ]
image.jpg
image.jpg [ 1.25 MiB | Viewed 1121 times ]
Author:  pash [ 24 Dec 2013 22:27 ]
Post subject:  Re: Oil pump drive pic
...and I bet the majority of those Lucky Hands gears I got are still not fitted :twisted:

Cheap insurance...
Author:  Maz [ 24 Dec 2013 22:32 ]
Post subject:  Re: Oil pump drive pic
:yt:
Author:  gibbsy [ 24 Dec 2013 22:43 ]
Post subject:  Re: Oil pump drive pic
Correct I am Guilty. :oooops: ......but the bike hasn't been used this year as I spent the year on the Ully and T140, it's nice to leave a bike for a couple of years and then return to it as it makes you appreciate it more especially when you have been doing a lot of work to it.... :D
Author:  richie [ 25 Dec 2013 00:28 ]
Post subject:  Re: Oil pump drive pic
Mine looked like that when I removed it last year at 35000 miles. Razor sharp, it was hard to believe it had'nt let go :ill:
Author:  WILLYBUELL [ 25 Dec 2013 00:30 ]
Post subject:  Re: Oil pump drive pic
got yer money,s worth out that yufffffff ,my concern now would be what damage the ni on 10 grams of ultra fine debris has done to the pinion bearing :yup:
Author:  Mickrick [ 25 Dec 2013 07:49 ]
Post subject:  Re: Oil pump drive pic
Mine was perfect at similar mileage. Strange.
Fitted the new one anyway, and cut the gear case down while I was at it. :)

You got that out in the knick of time I would say!
Author:  Mickrick [ 28 Dec 2013 17:32 ]
Post subject:  Re: Oil pump drive pic
Here´s my old one after similar mileage.

Attachments:
Oil pump drive gear.jpg
Oil pump drive gear.jpg [ 1.47 MiB | Viewed 1006 times ]
Author:  Mickrick [ 28 Dec 2013 17:35 ]
Post subject:  Re: Oil pump drive pic
The cam cover looks much better IMO. I still need to make up the oil lines.

Attachments:
IMG_0924.JPG
IMG_0924.JPG [ 2 MiB | Viewed 1003 times ]
Author:  pash [ 28 Dec 2013 17:47 ]
Post subject:  Re: Oil pump drive pic
Mickrick wrote:
Here´s my old one after similar mileage.

Put it on eBay...
Author:  Mickrick [ 28 Dec 2013 17:54 ]
Post subject:  Re: Oil pump drive pic
[quote="pash"][quote="Mickrick"]Here´s my old one after similar mileage.[/quote]
Put it on eBay...[/quote]
Aren´t we supposed to put them on the mantle piece, or is that only LH the ones? :)
Author:  pash [ 28 Dec 2013 18:02 ]
Post subject:  Re: Oil pump drive pic
Mickrick wrote:
pash wrote:
Mickrick wrote:
Here´s my old one after similar mileage.

Put it on eBay...

Aren´t we supposed to put them on the mantle piece, or is that only LH the ones? :)


Only the LH ones... ;)
Author:  Maz [ 28 Dec 2013 18:25 ]
Post subject:  Re: Oil pump drive pic
I really wouldn't use braided lines if I were you :)
Author:  Mickrick [ 28 Dec 2013 18:48 ]
Post subject:  Re: Oil pump drive pic
I´m using the nylon braid Maz ;)
Author:  Mickrick [ 28 Dec 2013 18:49 ]
Post subject:  Re: Oil pump drive pic
[quote="pash"][quote="Mickrick"][quote="pash"][quote="Mickrick"]Here´s my old one after similar mileage.[/quote]
Put it on eBay...[/quote]
Aren´t we supposed to put them on the mantle piece, or is that only LH the ones? :)[/quote]

Only the LH ones... ;)[/quote]

Oh bugger! I put mine in the bike! :shock:
Page 1 of 4 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/