Hi guys, was at a traffic light and suddenly a noise from inside the primary cover, open it and found a broken piece of aluminium ring
The clutch lever is completely loose. Any information is appreciatedthanks
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Noise from inside primary cover https://ukbeg.com/forum/viewtopic.php?f=7&t=18598 |
Page 1 of 1 |
| Author: | slimboy [ 10 Apr 2014 13:21 ] |
| Post subject: | Noise from inside primary cover |
Hi guys, was at a traffic light and suddenly a noise from inside the primary cover, open it and found a broken piece of aluminium ring The clutch lever is completely loose. Any information is appreciatedthanks |
|
| Author: | slimboy [ 10 Apr 2014 13:35 ] | ||
| Post subject: | Re: Noise from inside primary cover | ||
slimboy wrote: Hi guys, was at a traffic light and suddenly a noise from inside the primary cover, open it and found a broken piece of aluminium ring
The clutch lever is completely loose. Any information is appreciatedthanks
|
|||
| Author: | Maz [ 10 Apr 2014 13:46 ] |
| Post subject: | Re: Noise from inside primary cover |
Tis the clutch release mech. shoulder out of the primary case.......you'll either need a new case or a repair kit/machining of the old one. |
|
| Author: | slimboy [ 10 Apr 2014 17:53 ] |
| Post subject: | Re: Noise from inside primary cover |
Thanks for the info  .Is there anyone around London that can repair it?? |
|
| Author: | brother in buells [ 10 Apr 2014 18:45 ] |
| Post subject: | Re: Noise from inside primary cover |
Here are some options , The DIY option http://www.badweatherbikers.com/buell/m ... 1347988057 Or this http://www.fanatics-parts.de/buell-prim ... ,l-en.html |
|
| Author: | jiltedjohn [ 10 Apr 2014 20:15 ] |
| Post subject: | Re: Noise from inside primary cover |
200 Euros....ouch! |
|
| Author: | pash [ 10 Apr 2014 21:03 ] |
| Post subject: | Re: Noise from inside primary cover |
I was having a play with a broken cover that I had and made up a nice fixture for the milling machine...  If you can't get fixed up, I'll help you out, either do a PX on a cover in good nick or repair it (although I am not sure where I will find the time at the moment). |
|
| Author: | slimboy [ 11 Apr 2014 06:58 ] |
| Post subject: | Re: Noise from inside primary cover |
Looks like fixing it is stronger, I could do it myself unfortunately I don't have proper tools and space to work. Thanks for the info. Cheers |
|
| Author: | slimboy [ 11 Apr 2014 07:00 ] |
| Post subject: | Re: Noise from inside primary cover |
pash wrote: I was having a play with a broken cover that I had and made up a nice fixture for the milling machine... If you can't get fixed up, I'll help you out, either do a PX on a cover in good nick or repair it (although I am not sure where I will find the time at the moment). I'll check what's around London, in case I'll give you a shout,  Thanks |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|