UK Buell Enthusiasts Group
https://ukbeg.com/forum/

R&G Frame Protectors
https://ukbeg.com/forum/viewtopic.php?f=7&t=1860		 Page 1 of 2
Author:  zoidberg [ 28 Jul 2009 23:45 ]
Post subject:  R&G Frame Protectors
has anyone got these fitted along with frame pucks?

i was going to get a set, but Matt at Trojan wasn't sure if the R&G are proud of the frame pucks or not.

If they aren't I won't bother with them.

cheers.....

Dave
Author:  Roz [ 29 Jul 2009 22:15 ]
Post subject:  Re: R&G Frame Protectors
I had both. But then I also had the most dropped Buell in history. Belt n braces lad, belt n braces :lol:
Author:  zoidberg [ 29 Jul 2009 22:30 ]
Post subject:  Re: R&G Frame Protectors
:lol:

Cheers Roz,

Can you recall if the bungs were proud of the pucks?
Author:  Roz [ 29 Jul 2009 22:39 ]
Post subject:  Re: R&G Frame Protectors
We've discussed this at length (not much going on in the Wheeler household tonight :roll: ) and have decided that they were not. The frame pucks, if we recall correctly, were much further out than the R & G's. But someone with a better memory than us old farts may be along in a while to correct us.
Author:  zoidberg [ 29 Jul 2009 23:10 ]
Post subject:  Re: R&G Frame Protectors
Roz wrote:
We've discussed this at length (not much going on in the Wheeler household tonight :roll: ) and have decided that they were not. The frame pucks, if we recall correctly, were much further out than the R & G's. But someone with a better memory than us old farts may be along in a while to correct us.



:lol:

I may fit them anyway, as you say belt and braces.

Cheers

Dave...
Author:  Spook [ 30 Jul 2009 10:52 ]
Post subject:  Re: R&G Frame Protectors
Image

This is what you need Zoid.
Author:  Maz [ 30 Jul 2009 11:10 ]
Post subject:  Re: R&G Frame Protectors
:rofl:
Author:  Adam [ 30 Jul 2009 11:12 ]
Post subject:  Re: R&G Frame Protectors
:hehe: :rofl:
Author:  edd [ 30 Jul 2009 12:14 ]
Post subject:  Re: R&G Frame Protectors
zoidberg wrote:
has anyone got these fitted along with frame pucks?

i was going to get a set, but Matt at Trojan wasn't sure if the R&G are proud of the frame pucks or not.

If they aren't I won't bother with them.

cheers.....

Dave


My R&G bungs are attached to a 'Firebolt' crash bar...which is attached to the front engine mount...which is attached to... :lol:

The bungs ARE wider than the frame pucks! ;)

The bar bungs have other uses, such as reaching down to feel how much your motor is shaking, or you can fix other useless items to the bar and watch them shake lose on long runs. :lol:
Author:  zoidberg [ 30 Jul 2009 16:17 ]
Post subject:  Re: R&G Frame Protectors
Spook wrote:
Image

This is what you need Zoid.



I can't see the pic as I'm at work, but i'm guessing it's to do with stabilisers :lol:
Author:  zoidberg [ 31 Jul 2009 02:13 ]
Post subject:  Re: R&G Frame Protectors
zoidberg wrote:
Spook wrote:
Image

This is what you need Zoid.



I can't see the pic as I'm at work, but i'm guessing it's to do with stabilisers :lol:



just got home from work, and just as I thought.......... :lol:
Author:  zoidberg [ 31 Jul 2009 16:04 ]
Post subject:  Re: R&G Frame Protectors
Another question.

This time about the rear axle protectors. I fit these this morning, the bobbin/bung on the right hand side of the bike seem a little tight to where the paddock stand lifts it up. ie seems to be slightly recessed into the swingarm, the left side seem to be much prouder.

Is it due the the axle spindle sitting further in the swingarm on the right or can another spacer be fitted to give me more room?

Cheers....
Author:  Spook [ 31 Jul 2009 16:26 ]
Post subject:  Re: R&G Frame Protectors
Pictures :yc:
Author:  zoidberg [ 31 Jul 2009 16:29 ]
Post subject:  Re: R&G Frame Protectors
Spook wrote:
Pictures :yc:



here ya go spook Image
Author:  zoidberg [ 31 Jul 2009 16:29 ]
Post subject:  Re: R&G Frame Protectors
I'll take some pics later can't be arsed now.
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/