It is currently 23 Sep 2024 03:30

All times are UTC+01:00




Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next
Author Message
 Post subject: Bloody hell....
PostPosted: 16 Nov 2014 13:45 
Its been a few weeks since the Buell's seen daylight, in fact, other than fitting more carbon, some dual compound grips,new Carbon Lorriane pads and some adjustable pegs, I've done bugger all.. as I'm not qualified in Buell ownership yet...
So I thought I'd put the key in and see what happens.. clunk, clunk, bang, pop,pop,bang...braaaaaaph. pop! shed full of smoke, neighbours running for cover, its alive..big grin!!! :yup:

Now as I prey to the weather gods for the chance of a dry day before the bike seizes up, throws some strange component or worst still becomes unpopular, it might be worth trying to bed those pads in.. :rotfl: :rotfl: :rotfl:

Theres still a few jobs more jobs,gearbox OP shaft oiler, lucky to have a lathe and a pretty good tea boy(dad) at my disposal, unless Maz has a change of heart and will send mail order.. nah! think we all know that one...
But for the moment it was nice to see the bike in daylight, and know it still works... might not stop thou.... :sad1:


Top
   
 Post subject: Re: Bloody hell....
PostPosted: 29 Nov 2014 13:49 
Oh dear its broke.. parked in the middle of some major road works, engine management light came on, pop bang dead.. no priming, or starter motor, unable to raise breakdown cover via insurance, so left the bike and got home, 5 phone calls later and 1 email still not heard from insurance company, hope they are faster when I phone later about it being stolen, but then I dont think I'll be that lucky.. Man with a van will help recover it later..
well the longer nights are here and at least I'll have a project to work on... that KTM brochure does look rather good... :headbang:


Top
   
 Post subject: Re: Bloody hell....
PostPosted: 29 Nov 2014 14:22 
Well that was interesting.. the possibility's are endless.. I can hardly wait to spend countless hours working on it.
looks like its going to be parked up for a few months tbh.. oh well it was fun while it lasted.. 350 miles! :yup:


Top
   
 Post subject: Re: Bloody hell....
PostPosted: 29 Nov 2014 16:00 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Stator/Regulator/Battery...

viewtopic.php?p=251617#p251617

_________________
08 Specialized Langster


Top
 Post subject: Re: Bloody hell....
PostPosted: 29 Nov 2014 16:32 
Offline
User avatar

Joined: 10 Mar 2010 20:06
Posts: 1003
Current ride: 2004 Buell XB 12s
Location: Schoorl ,Netherlands
I say battery! :x ,have had something the same with mine afther a full day ride!
battery was complete dead ,the other parts where still working good!

_________________
The sound of a V-twin engine braking is music to my ears!!


Top
 Post subject: Re: Bloody hell....
PostPosted: 29 Nov 2014 16:49 
well its in the shed, wrapped up with a limsip and a warm blanket having been parked by the side of the road for a few hours..
battery on charge, connector 77 all good and no funny smells or brittle wiring, so will have to see what happens once the battery is back on..
Thanks for the tips guys, will see what the gods bring for me... :yup:


Top
   
 Post subject: Re: Bloody hell....
PostPosted: 29 Nov 2014 17:37 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Good luck!

_________________
08 Specialized Langster


Top
 Post subject: Re: Bloody hell....
PostPosted: 30 Nov 2014 20:59 
well the battery took a charge, so back on, and.. nothing! no priming, engine light, or starter.. so will be in there during the week have a look.. :yup:


Top
   
 Post subject: Re: Bloody hell....
PostPosted: 30 Nov 2014 21:05 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
Fuse blown due to short on the fuel pump wiring?

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
 Post subject: Re: Bloody hell....
PostPosted: 01 Dec 2014 09:23 
Offline

Joined: 07 May 2009 21:27
Posts: 1354
Current ride: XB12s,S1WL, Triumph
Location: Glossop in't th'hills
Ecm thrown the towel in ?


Top
 Post subject: Re: Bloody hell....
PostPosted: 01 Dec 2014 09:54 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Sounds like the battery as suggested earlier

_________________
08 Specialized Langster


Top
 Post subject: Re: Bloody hell....
PostPosted: 01 Dec 2014 18:33 
found it!!! bottom of the ignition switch..! all fuses where good, all connections good, was really starting to think it was going to be in the stator/ecm area's, when I was playing with the switches and noticed no horn or brake light, turned the bars and a flash from the engine management light, another wiggle (highly technical me..) and the whir of the fuel pump was next, a poke and pull on the wiring a press on the start button.. bang! back into life like nothing had ever happened..
So at least I've found the fault, so the ignition will be coming out to see if the wiring can be fixed or just replace the unit, but at least I found it and before to much heart ache..

Thanks for all the pointers guys, and giving me faith in a very helpful forum! :yup:


Top
   
 Post subject: Re: Bloody hell....
PostPosted: 01 Dec 2014 19:39 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
:yup:

_________________
08 Specialized Langster


Top
 Post subject: Re: Bloody hell....
PostPosted: 02 Dec 2014 00:17 
Offline
User avatar

Joined: 07 May 2009 19:09
Posts: 739
Current ride: XB9R
Location: Havant
NickyB,

Glad that you found the fault.

It's always good to find a solution that doesn't cost too much!

Dave


Top
 Post subject: Re: Bloody hell....
PostPosted: 02 Dec 2014 11:18 
Offline
User avatar

Joined: 31 Oct 2011 18:55
Posts: 433
Current ride: 1125r -stretched
Location: solihull
Must the same poor quality switch as fitted to the 1125s :(

I had a wire break off about 10mm from the solder joint, luckily for me it happened in the pits as I pulled back out of my space and turned the bars. At least I knew which area to look at.

Glad you found it :yup:

_________________
Nige...1125d 9.43@140mph


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited