UK Buell Enthusiasts Group
https://ukbeg.com/forum/

front brake switch
https://ukbeg.com/forum/viewtopic.php?f=7&t=22259		 Page 1 of 1
Author:  Chiz_4 [ 22 Mar 2017 12:36 ]
Post subject:  front brake switch
could anybody out there give me a part number for an xb12 scg 09,i know these switches can fit a lot of different bikes,much appreciated.
chiz.
Author:  dinogyro [ 22 Mar 2017 14:45 ]
Post subject:  Re: front brake switch
Not sure what I can and can't say on here, but I have a shop that sells Suzuki parts. There is a Suzuki switch that fits my XB12SS 2009. Pattern ones are cheap, but not as good as the genuine Suzuki. The genuine Suzuki part has a little rubber bellows around the switch prong, like the Buell part. The pattern doesn't, so I guess it will fail earlier.
I have test fitted the pattern part and it fits and works.
Let me know if I can give you more information without breaking forum rules.
Author:  Chiz_4 [ 22 Mar 2017 15:42 ]
Post subject:  Re: front brake switch
I'm sure it wouldn't be a problem for such a small item,I don't know the rules though.
Author:  dinogyro [ 22 Mar 2017 16:37 ]
Post subject:  Re: front brake switch
If you Google 57460-17C00, then I should be the second listing - Discountbikespares.

I would recommend the genuine one, but if you want the pattern one, let me know. I will sell you the one I have test fitted for £4, including post. Contact me through my website.

If I have broken any forum rules - sorry!
Author:  deepsix [ 22 Mar 2017 18:29 ]
Post subject:  Re: front brake switch
dinogyro wrote:
If you Google 57460-17C00, then I should be the second listing - Discountbikespares.

I would recommend the genuine one, but if you want the pattern one, let me know. I will sell you the one I have test fitted for £4, including post. Contact me through my website.

If I have broken any forum rules - sorry!


As far as I can tell, someone asked for help, you helped. That's what this place is good for, well done :yup:
Author:  king01 [ 22 Mar 2017 18:38 ]
Post subject:  Re: front brake switch
PM Maz. my firebolt brake switch went (common fault). He supplied one for £7.50 and aesily fitted it myself.

job done
Author:  pash [ 22 Mar 2017 18:40 ]
Post subject:  Re: front brake switch
dinogyro wrote:
If I have broken any forum rules - sorry!


Sorry??? Get in the corner and face the wall!!!










Just joshing :4roz:
Author:  Chiz_4 [ 22 Mar 2017 19:48 ]
Post subject:  Re: front brake switch
Cheers for everyone's help as usual.
Author:  dinogyro [ 22 Mar 2017 20:36 ]
Post subject:  Re: front brake switch
pash wrote:
dinogyro wrote:
If I have broken any forum rules - sorry!


Sorry??? Get in the corner and face the wall!!!










Just joshing :4roz:


It's just like chemistry class all over again...
Author:  Chiz_4 [ 05 Apr 2017 07:57 ]
Post subject:  Re: front brake switch
the suzuki one as supplied does fit.
Author:  Dirtyharry [ 05 Apr 2017 08:31 ]
Post subject:  Re: front brake switch
Use WD40 and spray it into the small hole under the switch, then take the brake 50 times.
In this way it grinds the contact free....
In 99% this solves the problem !
Author:  Chiz_4 [ 11 Apr 2017 07:58 ]
Post subject:  Re: front brake switch
on removal it had a broken terminal,so it was fecked anyway.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/