| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| X1 Carbon bits https://ukbeg.com/forum/viewtopic.php?f=7&t=22957 |
Page 1 of 1 |
| Author: | Pan [ 10 Feb 2018 20:47 ] |
| Post subject: | X1 Carbon bits |
I picked up some carbon bodywork for my X1 but the fly screen is for twin headlights, not a problem I though as I'll trim it back to accommodate the standard headlight. But once it arrived it clearly isn't for an X1, any ideas what bike it fits? If anyone is looking for one for whatever it fits drop me a pm  Mark |
|
| Author: | pash [ 10 Feb 2018 22:48 ] |
| Post subject: | Re: X1 Carbon bits |
Looks X1 trimmed down. The S1 flyscreen is a mirror image of the X1 (and a slightly different shape). |
|
| Author: | Pan [ 11 Feb 2018 08:56 ] |
| Post subject: | Re: X1 Carbon bits |
I may as well just trim it for the round headlight and see how it looks on the bike. Nothing to lose, it may be ok until I get a better one. Cheers Pash, Mark |
|
| Author: | Nutah [ 11 Feb 2018 10:34 ] |
| Post subject: | Re: X1 Carbon bits |
leave it as it is, & look like batman 
|
|
| Author: | Pan [ 12 Feb 2018 20:54 ] |
| Post subject: | Re: X1 Carbon bits |
Now there's a thought, the BUELL bat bike 😋 |
|
| Author: | tone [ 15 Feb 2018 11:58 ] |
| Post subject: | Re: X1 Carbon bits |
https://www.ebay.co.uk/itm/192453058576?ul_noapp=true |
|
| Author: | Pan [ 15 Feb 2018 20:22 ] |
| Post subject: | Re: X1 Carbon bits |
Cheers tone, if that was for an X1 not an S1 I'd have bought it but one will torn up I'm sure Mark |
|
| Author: | x1glider [ 15 Feb 2018 21:21 ] |
| Post subject: | Re: X1 Carbon bits |
The S1 flyscreen will actually work. All you have to do is turn your dash panel upside down. When I used to race my X1, the race flyscreen from Henry Duga @ Buell was an S1 item and that's what I did. |
|
| Author: | Pan [ 22 Feb 2018 23:15 ] |
| Post subject: | Re: X1 Carbon bits |
I've ordered one from f&f carbon in Germany, hopefully it will be decent quality Mark |
|
| Author: | Pan [ 07 Mar 2018 18:16 ] |
| Post subject: | Re: X1 Carbon bits |
Pan wrote: I've ordered one from f&f carbon in Germany, hopefully it will be decent quality Mark Emailed them today as it's over 2 weeks and it still shows as not dispatched. Apparently they haven't any made so it's going to be 6 to 10 weeks! Not happy! Mark |
|
| Author: | Mickrick [ 29 Mar 2018 13:17 ] |
| Post subject: | Re: X1 Carbon bits |
I hate that! Take your money, then tell you it's out of stock  A certain Dutch crowd did that to me too many times. I stopped buying stuff of them. I really get sand in my Vagina when they do that 
|
|
| Author: | Nutah [ 29 Mar 2018 20:19 ] |
| Post subject: | Re: X1 Carbon bits |
Pan wrote: Pan wrote: I've ordered one from f&f carbon in Germany, hopefully it will be decent quality Mark Emailed them today as it's over 2 weeks and it still shows as not dispatched. Apparently they haven't any made so it's going to be 6 to 10 weeks! Not happy! Mark probably getting made in China ?, then maybe shipped to Germany ..do a bit of research to be on the safe side ? |
|
| Author: | Finmows [ 29 Mar 2018 20:48 ] |
| Post subject: | Re: X1 Carbon bits |
Mickrick wrote: I really get sand in my Vagina  I have never heard that expression before
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|