| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Front Disc https://ukbeg.com/forum/viewtopic.php?f=7&t=24408 |
Page 1 of 1 |
| Author: | ogri211 [ 28 May 2020 01:30 ] |
| Post subject: | Front Disc |
I'm looking at upgrading my front disc on my 96 S1, most of the replacement discs are listed as after 98, is there a difference or is it just the type of bolts, so would using bolts from a 98 with a 98 disc fit straight on. |
|
| Author: | pash [ 28 May 2020 10:22 ] |
| Post subject: | Re: FronT Disc |
All tuber discs are the same nominal dimensions from 96 to 02. The difference in fitting is going from countersunk screws to Torx dome head, which are better. The EBC Pro-Lite is the people’s choice, MD734RS being the later fitting. |
|
| Author: | TOPGUMM [ 28 May 2020 12:23 ] |
| Post subject: | Re: FronT Disc |
£159 for the prolite was the cheapest I could see. |
|
| Author: | 03 [ 28 May 2020 12:48 ] |
| Post subject: | Re: FronT Disc |
https://en.discacciatidbs.com/product/b ... -standard/ |
|
| Author: | TOPGUMM [ 28 May 2020 12:59 ] |
| Post subject: | Re: FronT Disc |
Button head fixings CA0005.T Disc https://www.ebay.co.uk/itm/FIT-BUELL-M2 ... 2749.l2649 |
|
| Author: | ogri211 [ 28 May 2020 16:42 ] |
| Post subject: | Re: FronT Disc |
TOPGUMM wrote: Cheers ordered the disc I will get the bolts when I get a minute Stevie. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|