Hi everybody Matt333 new member here. Purchased Buell S1 1998 a couple of months ago as I thought I would have another Buell again as I use to have Molten Orange years ago. Have been doing a few minor jobs that needing doing but I have great difficulty obtaining a petrol tap washer seal , the rubber seal is orange 3 hole 18mm in diameter , the tap is a O.M.G . Don't know if this is a standard tap or not as the petrol tank is a HOLTWORKS Tank. I have spoken to Holtworks and they suggested to come on this forum as the previous owner who ordered the tank was a member. Can anybody help me to obtain a rubber seal for my tap or steer me in the right direction who carries spares. Any help would be gratefully appreciated. Cheers Matt

Welcome matt333, the fuel tap is sealed using an o-ring then the two screws either side,

_________________
Last year I joined a group for anti-social people
We haven't met yet.

Hi thanks for that , I have got the tap strip down but I can not find a replacement washer seal. Do you know anybody that would stock them .

Ok, is this the seal between the tank and tap or the tap internal seal ?

_________________
Last year I joined a group for anti-social people
We haven't met yet.

a picture / photo speaks a thousand words .

_________________
Buell Ulysses XB12X 06/08

Search , petcock repair kit , or just replace the whole thing. One to match the oem one was found by pash . pingel taps were fitted to some holtworks tanks , measure between fixing hole centres if buying.

Hi, you need an OMG or equivalent 34mm from centre for mounting they do a metal fuel tap upgrade or just replace the mounting o-ring but make sure it’s fuel compatible ie viton.It’s sounds like you have the original tap as the pingle is bigger and has a mounting block.I have the standard tap on my holtsworks tank and it mounted perfectly with no problems , Hope that helps.Do a google search for the tap but make sure you purchase a forward outlet.

https://www.ebay.co.uk/itm/196520369031 ... R66tltqoZA
Could work , check it out to your old one.

Thanks everybody getting back to me. This is a picture of the tap seal 18mm in diameter. Does anybody knows where they could be available.

https://store.bevelheaven.com/Dellorto/ ... -x-1-Taps/
Ducati?

Thanks for all your help. I have managed to purchase a complete new tap in the end. A OMG Tap from Steve Goode Motorcycles .
stevejgoode@aol,com
Could be help someone else.
Matt.