Just gauging if there is any interest in my latest yokes designs.
The first are plain top finish.
These are the pocketed version.
They both look like this underneath.
Andy
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Tuber Yokes https://ukbeg.com/forum/viewtopic.php?f=7&t=2687 |
Page 1 of 2 |
| Author: | spondon440 [ 20 Sep 2009 22:47 ] |
| Post subject: | Tuber Yokes |
Just gauging if there is any interest in my latest yokes designs. The first are plain top finish. These are the pocketed version. They both look like this underneath. Andy |
|
| Author: | Norm [ 20 Sep 2009 22:48 ] |
| Post subject: | Re: Tuber Yokes |
You took this pix before I deposited my body fluids then.  Lovely kit. 
|
|
| Author: | spondon440 [ 20 Sep 2009 22:50 ] |
| Post subject: | Re: Tuber Yokes |
Norm wrote: You took this pix before I deposited my body fluids then. Lovely kit.  Thanks Norm. |
|
| Author: | Maz [ 20 Sep 2009 23:01 ] |
| Post subject: | Re: Tuber Yokes |
There's been a few peeps depositing bodily fluids on them at the shop......for the 1st time in my life, I'm gonna be wearing them poofy rubber glove things when I fit them to the bike  Seriously good kit Andy, I really appreciate proper engineering and cant believe my luck in having you on my doorstep mate
|
|
| Author: | Strider222 [ 20 Sep 2009 23:24 ] |
| Post subject: | Re: Tuber Yokes |
Top quality kit!! I will be very interested should you decide to make them. Is the width of the fork leg centres the same as the OEM or wider (as a similar product)? If it's wider, will you be also supplying the necessary spacers? No doubt we'll hear how much in due time. Rgds, John |
|
| Author: | Maz [ 20 Sep 2009 23:28 ] |
| Post subject: | Re: Tuber Yokes |
Direct replacement John
|
|
| Author: | Spook [ 21 Sep 2009 08:46 ] |
| Post subject: | Re: Tuber Yokes |
I want to know how much now, and can you do them in a dull tarnished finish? |
|
| Author: | Norm [ 21 Sep 2009 08:51 ] |
| Post subject: | Re: Tuber Yokes |
Spook wrote: .,.. can you do them in a dull tarnished finish? I think the body fluids are having that effect. |
|
| Author: | spondon440 [ 21 Sep 2009 15:34 ] |
| Post subject: | Re: Tuber Yokes |
Can actually do these to suit different frontends, like R1, zx10r whatever suits / fits. |
|
| Author: | Motorrad [ 21 Sep 2009 16:04 ] |
| Post subject: | Re: Tuber Yokes |
Does this mean there is now an official "Yokes Page?" |
|
| Author: | paulalig [ 21 Sep 2009 19:21 ] |
| Post subject: | Re: Tuber Yokes |
| Very nice, what does the underside of the unpocketed bottom yoke look like?
|
|
| Author: | Adam [ 21 Sep 2009 19:33 ] |
| Post subject: | Re: Tuber Yokes |
Proper metal Porn. They are bloody lovely That table needs a good French Polish 
|
|
| Author: | Norm [ 21 Sep 2009 21:05 ] |
| Post subject: | Re: Tuber Yokes |
paulalig wrote: what does the underside of the unpocketed bottom yoke look like? I reckon it looks how spondon shows it looks in the last picture, subtly hidden by the words "They both look like this underneath.". |
|
| Author: | Nutah [ 21 Sep 2009 21:23 ] |
| Post subject: | Re: Tuber Yokes |
Adam wrote: Proper metal Porn. They are bloody lovely  X2 
|
|
| Author: | spondon440 [ 21 Sep 2009 22:56 ] |
| Post subject: | Re: Tuber Yokes |
OK, seems to be a fair bit of interest, supplied as shown in a plain finish as a top yoke, bottom yoke, stem, lower risers and fastners £525.00, £25.00 cheaper without the top pocketing. Can supply them to suit other forks and in various finishes at extra cost. Will do some better pictures soon. Andy |
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|