Do not under any circumstances try to force it onto the pullys or it will break again in a very short milage....the rear axle needs slakening off i think it's 15 turns and the idler pulley needs removing.You sure they've given you the correct belt
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| belt change https://ukbeg.com/forum/viewtopic.php?f=7&t=2910 |
Page 1 of 1 |
| Author: | davylat [ 06 Oct 2009 23:05 ] |
| Post subject: | belt change |
Well after i managed to get a belt from edinburgh HD for my 55 uly, i had a go fitting it today, but came across a problem, how do you get the pulley back on as the belt is so tight? i can't get it high enough. Can someone tell me what i should be doing when changing the belt please. David |
|
| Author: | panther [ 06 Oct 2009 23:22 ] |
| Post subject: | Re: belt change |
have you left the rear spindle loose???????.new belt i can hear the gearbox bearing breaking up from here.put a free spirits on quick |
|
| Author: | kevmean [ 06 Oct 2009 23:31 ] |
| Post subject: | Re: belt change |
Do not under any circumstances try to force it onto the pullys or it will break again in a very short milage....the rear axle needs slakening off i think it's 15 turns and the idler pulley needs removing.You sure they've given you the correct belt
|
|
| Author: | norrie [ 07 Oct 2009 04:17 ] |
| Post subject: | Re: belt change |
Yeah you need to loosen the rear axle off. As yuo loosen it you will see the wheel move forward to enable you to get the tensioner back on. Where do you you stay? If it's not to far I will come round and give you a hand if you want. |
|
| Author: | davylat [ 07 Oct 2009 07:46 ] |
| Post subject: | Re: belt change |
I'll see if i can loosen the axle off more without it coming off. They said it was a new model of belt or something. Cheers Norrie, i'll see how i get on with it today. You every heard of a place called Langholm? |
|
| Author: | Maz [ 07 Oct 2009 11:47 ] |
| Post subject: | Re: belt change |
Part no. on the belt should be G0500.1AKE |
|
| Author: | norrie [ 07 Oct 2009 14:47 ] |
| Post subject: | Re: belt change |
Yeah I know where Langholm is and it's not that close to me. You want to make sure you have the correct belt as there are a few different ones now although a new belt is pretty tight when fitting it should still be possible. Kev is correct you need to loosen the rear axle 15 turns although you should be able to see when it's loose enough when it gets to the end of the taper. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|