It is currently 18 May 2025 14:51

All times are UTC+01:00




Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next
Author Message
 Post subject: Thanks Tubbs
PostPosted: 16 Oct 2009 15:32 
Offline

Joined: 08 May 2009 07:53
Posts: 0
Just got back from picking my S1 engine up from Tubbs at Morespeed,which he has totally rebuilt for me, the attention to detail and the finish is just awesome, if it goes half as good as it looks I will be well chuffed I asked Tubbs to take some photos to post as I dont have a digital camera and if I did I wouldnt have a clue how to post them anyway . It wont look as shiny as it actually is because Tubbs covered it in wax to prevent any corrosion while he waited for me to pick it up, anyway a BIG thank you to Tubbs and the guys at Morespeed and on with faze two of the rebuild chassis and suspension :D


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 16 Oct 2009 19:30 
Offline
Needs more cowbell
User avatar

Joined: 03 Apr 2009 10:09
Posts: 8609
Current ride: None
Location: Southampton
Nice one Deno, keep us updates with the project :yup:

_________________
"With square conduct, level steps, and upright intentions ..”


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 17 Oct 2009 20:31 
Offline
Needs more cowbell
User avatar

Joined: 03 Apr 2009 10:09
Posts: 8609
Current ride: None
Location: Southampton
Pic's of Deno's engine

_________________
"With square conduct, level steps, and upright intentions ..”


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 17 Oct 2009 20:42 
Offline

Joined: 08 May 2009 07:53
Posts: 0
Thanks for posting the pics Ash, I am ok with nuts and bolts but shit with a poota :clap:


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 17 Oct 2009 20:43 
Offline
Needs more cowbell
User avatar

Joined: 03 Apr 2009 10:09
Posts: 8609
Current ride: None
Location: Southampton
Pleasure mate, you have a good looking motor there for sure :yup:

_________________
"With square conduct, level steps, and upright intentions ..”


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 17 Oct 2009 20:44 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
:yt:

_________________
08 Specialized Langster


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 17 Oct 2009 21:12 
Offline

Joined: 08 May 2009 07:53
Posts: 0
You should see it now I have got the wax off and polished it you need fukin sunglasses.
Harley may have shafted Buell but enthusiasts like us will keep the mark alive


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 17 Oct 2009 22:30 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8646
Location: Manchester
:shut: :shut: :shut:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 18 Oct 2009 01:28 
Offline
has it got a pulse?
User avatar

Joined: 06 May 2009 15:47
Posts: 2565
Current ride: FUBAR...Enough said!
Location: Reading
:hehe: oil filter per chance :?: :lol: :lol:

_________________
FUBAR pilot

You only need two bikes in life-an S1 and a Multistrada!


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 18 Oct 2009 09:59 
Offline

Joined: 08 May 2009 07:53
Posts: 0
LOL Been waitin for a comment on that :D


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 20 Oct 2009 17:00 
Offline
User avatar

Joined: 26 May 2009 12:58
Posts: 591
Jeeee-sus! :worthy:

That's what I would call a seuxy engine. Just wish I had the dosh to take mine to tubs. The polishing job alone would be worth it! 8-)

_________________
Illegitimi non carborundum


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 20 Oct 2009 17:12 
Offline

Joined: 08 May 2009 07:53
Posts: 0
mich wrote:
Jeeee-sus! :worthy:

That's what I would call a seuxy engine. Just wish I had the dosh to take mine to tubs. The polishing job alone would be worth it! 8-)

Thanks I like it to. Actually Tubbs is not that expensive but the POLISHING was
it will be along time till its finished becase I want it spot on, so as and when the dosh
is available ;)


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 20 Oct 2009 19:55 
Offline
User avatar

Joined: 06 May 2009 19:47
Posts: 389
Location: Laurel's Wessex
deno wrote:
mich wrote:
Jeeee-sus! :worthy:

That's what I would call a seuxy engine. Just wish I had the dosh to take mine to tubs. The polishing job alone would be worth it! 8-)

Thanks I like it to. Actually Tubbs is not that expensive but the POLISHING was
it will be along time till its finished becase I want it spot on, so as and when the dosh
is available ;)

Polishing is dirty, labourous and extremely boring, well worth the money they charge you to do it, IMO.
Guess what I've been doing all afternoon ;)

_________________
http://www.youtube.com/watch?v=Pbi5Ggmk ... re=related


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 20 Oct 2009 20:26 
Offline
has it got a pulse?
User avatar

Joined: 06 May 2009 15:47
Posts: 2565
Current ride: FUBAR...Enough said!
Location: Reading
thorkill the tall wrote:
Polishing is dirty, labourous and extremely boring, well worth the money they charge you to do it, IMO.
Guess what I've been doing all afternoon ;)


Ummmmm, touching yourself :?: :)

_________________
FUBAR pilot

You only need two bikes in life-an S1 and a Multistrada!


Top
 Post subject: Re: Thanks Tubbs
PostPosted: 20 Oct 2009 21:29 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
Mmmmm.............nothing like that lovely black snot when you blow your nose after a good session at the mop :lol: :lol:

_________________
If your dreams don't scare you, they are not big enough.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 92 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited