UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
oil filter wrench? https://ukbeg.com/forum/viewtopic.php?f=7&t=3035 |
Page 1 of 1 |
Author: | fatboy [ 17 Oct 2009 09:50 ] |
Post subject: | oil filter wrench? |
can anyone advise me of where to get an oil filter wrench to fit a uly, my local hd dealer have had one on back order for 3 months, fed up waiting, been told its 65mm? any advice appreciated |
Author: | gunter [ 17 Oct 2009 10:15 ] |
Post subject: | Re: oil filter wrench? |
I have a faint memory, that pash once made a list of suitable devices. Maybe that's still present in the archive or take a look a the how-to section. |
Author: | pash [ 17 Oct 2009 10:35 ] |
Post subject: | Re: oil filter wrench? |
Don't forget to check the How To section viewtopic.php?f=17&t=15 I have one of these: http://cgi.ebay.co.uk/HONDA-65MM-OIL-FI ... 5883673bbc and it works a treat |
Author: | THE FLYING DUCHMAN [ 17 Oct 2009 17:26 ] |
Post subject: | Re: oil filter wrench? |
It should, although tight, come off by hand. If not you could, I know not a top line thing to do, use a screwdriver. K&N filters have a hex head on top so you can use a spanner or socket. Dont forget to fill the filter and oil the seal. |
Author: | pash [ 17 Oct 2009 17:28 ] |
Post subject: | Re: oil filter wrench? |
And, when you put the new one on, tighten it by hand... |
Author: | THE FLYING DUCHMAN [ 17 Oct 2009 17:34 ] |
Post subject: | Re: oil filter wrench? |
Grip firmly at the base, think of England and twist. Oh and then you can fit your new oil filter |
Author: | Davidxt [ 18 Oct 2009 11:23 ] |
Post subject: | Re: oil filter wrench? |
i use the socket that i used on my suzuki. |
Author: | Bonzo [ 18 Oct 2009 12:02 ] |
Post subject: | Re: oil filter wrench? |
I just used a strap type, don't have to worry about the size then |
Author: | Toyboy1584 [ 18 Oct 2009 14:29 ] |
Post subject: | Re: oil filter wrench? |
Strap wrench works fine for me, on a extension bar. |
Author: | fatboy [ 18 Oct 2009 17:38 ] |
Post subject: | Re: oil filter wrench? |
thanks for all your advice, much appreciated. |
Author: | pash [ 18 Oct 2009 18:00 ] |
Post subject: | Re: oil filter wrench? |
Think we did this debate to death in the olden days... http://www.ukbeg.com/archive/modules.ph ... 3038#43038 |
Author: | Adam [ 18 Oct 2009 19:06 ] |
Post subject: | Re: oil filter wrench? |
I got my socket type wrenches - Tuber and Fueller, from Halfords. If the filter is on stupid tight, then drill a hole through the filter wrench and then stick a rod (6" nail etc) through the whole lot. |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |