UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Levers compatability
https://ukbeg.com/forum/viewtopic.php?f=7&t=3371		 Page 1 of 2
Author:  sportster_mann [ 05 Nov 2009 20:25 ]
Post subject:  Levers compatability
Using the PAZZO website I have compiled a list of bikes of various makes that appear to share front brake and clutch levers with the 1125R/CR - I have used the Pazzo part numbers as a guide so there is no guarantee that original parts from other manufacturers will fit and I accept no responsibility - you use this list at your own risk !

1125R/CR front brake lever compatibility ( PAZZO F-14 )

KAWASAKI
ZX-6/ZZR600 1990-2004
ZZR600 2005-2007
ZX6R / ZX636R / ZX6RR 2000-2004
ZX7R / ZX7RR 1989-2003
ZR750 ZEPHYR 1991-1993
ZX9 1994-1997
ZX9R 1998-1999
ZX9R 2000-2003
ZX10R 2004-2005
Z1000 2003-2006
Z1000 2007-2009
ZX1100 / ZX-11 1990-2001
ZRX1100 / 1200 1999-2007
ZX12R 2000-2005
ZZR1200 2002-2005
ZG1000 CONCOURS 1992-2006
ZXR400 all years
GPZ500S/EX500R NINJA 1990-2009
ER-5 2004-2005
NINJA 650R (ER-6f ER-6n) 2006-2008
VERSYS 2006-2008
Z750S (not Z750 model) 2006-2008

SUZUKI
GSXR600 1997-2003
GSXR750 1996-2003
GSXR1000 2001-2004
TL1000S 1997-2001
TL1000R 1998-2003
SV1000/S 2003-2007
HAYABUSA/GSXR1300 1999-2007
GSF1200 BANDIT 2001-2006
GSF1250 BANDIT 2007-2009
DL1000/V-STROM 2002-2009
GSX1400 2001-2007
GSF650 BANDIT 2007
SV650/S 1999-2009
DL650/V-STROM 2004-2009
600/750 KATANA 1998-2006
GSR600 2006-2009
GSX650F 2008-2009
SFV650 GLADIUS 2009

TRIUMPH
DAYTONA 955i 1997-2003
SPEED TRIPLE 1997-2003
SRINT ST 1997-2003
SPRINT RS 1999-2003
TT 600 2000-2003
SPEED FOUR 2003-2004
SPEED FOUR 2005-2006
SPEED TRIPLE 2004-2007
DAYTONA 600/650 2004-2005
DAYTONA 955i 2004-2006
SPRINT ST/RS 2004-2009
THRUXTON 2004-2008
BONNEVILLE T100 2006-2008
TIGER 2007-2009
ROCKET III 2004-2007
675 STREET TRIPLE 2008-2009

YAMAHA
YZF R6 1999-2004
YZF R1 2002-2003
FZ1 FAZER 2001-2005
FJR 1300 2003

1125R/CR clutch lever compatibility ( PAZZO C-777 )

KAWASAKI
ZX7R / ZX7RR 1989-2003
ZX9 1994-1997
ZX1100 / ZX-11 1990-2001
ZRX1100 / 1200 1999-2007
ZZR1200 2002-2005
ZG1000 CONCOURS 1992-2006

YAMAHA
FJR 1300 2003
FJR 1300 2004-2009
XJR 1300 2004-2009
MT-01 2004-2009
V-MAX 2009

Sorry if this is a bit long - but I couldn't be arsed to find somewhere else to host it !

Now if somebody wants to do the same for the rest of the Buell models, please feel free to do so ...
Author:  Avalaugh [ 05 Nov 2009 21:02 ]
Post subject:  Re: Levers compatability
So who is gonna try it first then ? source some second hand ones and save a fortune :)

good work
Author:  sportster_mann [ 05 Nov 2009 21:26 ]
Post subject:  Re: Levers compatability
I will be looking, eventually - but all my money is spoken for until the new year ...

I'm hoping that the levers will be pretty generic - surely other manufacturers will buy parts in - the same as Buell ...
Author:  pash [ 05 Nov 2009 23:04 ]
Post subject:  Re: Levers compatability
Avalaugh wrote:
So who is gonna try it first then ? source some second hand ones and save a fortune :)

good work


People are already doing it...

Shame Hondas are not on the list
Author:  sportster_mann [ 08 Nov 2009 11:30 ]
Post subject:  Re: Levers compatability
I've bought a pair of these to try ...
Author:  skipthedog [ 08 Nov 2009 17:58 ]
Post subject:  Re: Levers compatability
:clap: Well done Sportster :yup:
Author:  sportster_mann [ 14 Nov 2009 17:11 ]
Post subject:  Re: Levers compatability
sportster_mann wrote:
I've bought a pair of these to try ...


Well - the levers are fitted, went on without a hitch. There is only 4 point adjustment on them though ( there's 5 on the Buell levers ) but they seem OK and work with no binding - need to take them out for a test drive but the weather was not condusive today and didn't want to risk it !
Author:  Mitch [ 14 Nov 2009 18:15 ]
Post subject:  Re: Levers compatability
Yamaha FZS600 Fazer 02-03 front brake lever fits an 07 XB12Scg.

I know this as I used to have a fazer, and when I dropped it last year turning in a layby I rode home thought it looked the same. About £13 on ebay
Author:  sportster_mann [ 16 Nov 2009 10:31 ]
Post subject:  Re: Levers compatability
Well I am please to report that the levers I fitted got me to work OK ! 8-) So it was only an 8 mile journey but it was in stop/go traffic and the roads were really wet and the levers were no trouble at all.

If anything I actually prefer the clutch lever as the lever blade has a narrower profile and matches the brake lever better than the original - if you compare the Buell brake and clutch levers then you will see that they are both different.

So all in all, at an all in cost of about £17 from Ebay it is definitely worth it. although I am wondering how long they will last - the build quality is OK but not perfect. But IIRC the official Buell clutch lever alone is about £60, so that would pay for a few sets ...

... so now I will be scouring EBay for Pazzo Kawasaki levers - should be able to pick up a set second hand at a reasonable price now that I know which ones to look for. ;)

But I will report on them long term and if there are any issues then I will post them up.
Author:  midlifecrisis [ 16 Nov 2009 22:02 ]
Post subject:  Re: Levers compatability
sportster_mann wrote:

... so now I will be scouring EBay for Pazzo Kawasaki levers - should be able to pick up a set second hand at a reasonable price now that I know which ones to look for. ;)

along with a lot of other buell owners, now you'v told them what to look for :lol:
Author:  chris(madrid) [ 17 Nov 2009 08:09 ]
Post subject:  Re: Levers compatability
Just to go off topic a bit - anybody ever fitted PAZZO or any other short levers on a Tuber?

Down :maz:
Author:  Spook [ 17 Nov 2009 12:25 ]
Post subject:  Re: Levers compatability
chris(madrid) wrote:
Just to go off topic a bit - anybody ever fitted PAZZO or any other short levers on a Tuber?

Down :maz:


Yes. I fitted short Pazzo's to the M2 and I have short CRG's on the X1. Big improvement I thought.
Author:  Bonzo [ 17 Nov 2009 16:01 ]
Post subject:  Re: Levers compatability
Urgently need to know what other make/ after market clutch lever fits an XB12S (2006) :!: :P
Author:  sportster_mann [ 17 Nov 2009 16:27 ]
Post subject:  Re: Levers compatability
Sorry Bonzo, looking at the PAZZO compatibility guide, it looks as if the Buell clutch lever is unique. :roll:

That's assuming that F21 is the brake lever and B55 is the clutch - if it's the other way round then a 99-01 Yamaha R1 or a 07-09 Kawasaki Z750 lever may work.
Author:  kevmean [ 17 Nov 2009 17:01 ]
Post subject:  Re: Levers compatability
Bonzo wrote:
Urgently need to know what other make/ after market clutch lever fits an XB12S (2006) :!: :P


The genuine Buell clutch lever for my X1 wasn't expensive and it included the perch and clutch switch ;)
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/