Hi, I will getting rid of the S1 swing arm and fitting an X1 and would like to know what parts I need to source. I have the cast swing arm and belt adjusters . I suppose I need an X1 axle and new bearings and new type isolators (anyone have the part numbers for the isolators) . Do the rear brakes swap over from the S1? or is it worth upgrading . Searched the archives so have some info, thanks.

Isolators are L0504.9 and l0505.9.....11.33 each incl. vat.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

The brake caliper will be fine, but you will probably need a new brake line as it will be too short / tight. Good time to fit a new braided one.
Before you fit it, drill a 3mm hole in the underside of the shock pivot fork to let the water out.

_________________
I started out with nothing and still got most of it left.

Got it thanks.