UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
Must have Ulysees mods https://ukbeg.com/forum/viewtopic.php?f=7&t=7164 |
Page 1 of 2 |
Author: | steveo [ 20 Jun 2010 16:47 ] |
Post subject: | Must have Ulysees mods |
Hi all, I wonder if I could pick your brains people... What are the must do things to a bog standard 06 Uly? like K+N air filter etc... give me wish list to spend on ![]() thanks Steve |
Author: | Nutah [ 20 Jun 2010 18:05 ] |
Post subject: | Re: Must have Ulysees mods |
bag of wheel bearings ![]() change them every 5k freespirits tensioner K&N are good regular oil changes, 2.5k gear oil as well cheaper than a gearbox ![]() |
Author: | steveo [ 20 Jun 2010 18:11 ] |
Post subject: | Re: Must have Ulysees mods |
Nutah wrote: bag of wheel bearings ![]() change them every 5k freespirits tensioner K&N are good regular oil changes, 2.5k gear oil as well cheaper than a gearbox ![]() tnx nutah! |
Author: | wobbly [ 20 Jun 2010 20:04 ] |
Post subject: | Re: Must have Ulysees mods |
Hi Steveo, don't forget the airbox breather mod, do it when you change the filter. Cheap as chips and stops the engine breathing crap. Cheers, Richard. |
Author: | steveo [ 20 Jun 2010 20:24 ] |
Post subject: | Re: Must have Ulysees mods |
wobbly wrote: Hi Steveo, don't forget the airbox breather mod, do it when you change the filter. Cheap as chips and stops the engine breathing crap. Cheers, Richard. thanks wobbly! is there a post on here to look at? |
Author: | Nutah [ 20 Jun 2010 21:15 ] |
Post subject: | Re: Must have Ulysees mods |
have a look in the how to section , loads of top stuff in there ![]() |
Author: | Beef [ 20 Jun 2010 21:22 ] |
Post subject: | Re: Must have Ulysees mods |
Best mod bar none............. Fit a Helicon motor in it ![]() |
Author: | whichway? [ 22 Jun 2010 21:12 ] |
Post subject: | Re: Must have Ulysees mods |
replace the plastic wiring protector at the headstock, less than a tenner, pt no (03-07-08) 07 wiring harness protector....whichway? check the part no! |
Author: | steveo [ 22 Jun 2010 21:54 ] |
Post subject: | Re: Must have Ulysees mods |
whichway? wrote: replace the plastic wiring protector at the headstock, less than a tenner, pt no (03-07-08) 07 wiring harness protector....whichway? check the part no! thanks whichway! |
Author: | wobbly [ 23 Jun 2010 20:33 ] |
Post subject: | Re: Must have Ulysees mods |
steveo wrote: wobbly wrote: Hi Steveo, don't forget the airbox breather mod, do it when you change the filter. Cheap as chips and stops the engine breathing crap. Cheers, Richard. thanks wobbly! is there a post on here to look at? Yes there is, somwhere... Good idea to get a grease nipple/plug thing for the output shaft. Cheers, Richard. |
Author: | steveo [ 24 Jun 2010 22:29 ] |
Post subject: | Re: Must have Ulysees mods |
wobbly wrote: steveo wrote: wobbly wrote: Hi Steveo, don't forget the airbox breather mod, do it when you change the filter. Cheap as chips and stops the engine breathing crap. Cheers, Richard. thanks wobbly! is there a post on here to look at? Yes there is, somwhere... Good idea to get a grease nipple/plug thing for the output shaft. Cheers, Richard. thanks Rich! |
Author: | steveo [ 24 Jun 2010 22:40 ] |
Post subject: | Re: Must have Ulysees mods |
planning to fit a stealth exhaust soon, will it require any re-mapping? also whats a powersier and would I need/benifit from one? thanks All Steveo |
Author: | yourguitarhero [ 25 Jun 2010 16:59 ] |
Post subject: | Re: Must have Ulysees mods |
1) Not required, but could be helpful 2) A piggyback ECM. Apparently they suck ass, plus you don't need one as your 06 ECM can be accessed directly using ECMSpy software. |
Author: | Beef [ 25 Jun 2010 17:10 ] |
Post subject: | Re: Must have Ulysees mods |
I don't know what was wrong with my idea!! ![]() |
Author: | pash [ 26 Jun 2010 11:18 ] |
Post subject: | Re: Must have Ulysees mods |
whichway? wrote: replace the plastic wiring protector at the headstock, less than a tenner, pt no (03-07-08) 07 wiring harness protector....whichway? check the part no! Y1000.2AK The clutch cable "wireform" often breaks, the revised part is N0012.1AAA |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |