UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
1125R Whats missing here please ? https://ukbeg.com/forum/viewtopic.php?f=7&t=7989 |
Page 1 of 1 |
Author: | albert666 [ 12 Aug 2010 20:46 ] |
Post subject: | Re: 1125R Whats missing here please ? |
mine had nothing on it now it has a fairing bracket maybe thats what yours had |
Author: | Adam [ 12 Aug 2010 20:48 ] |
Post subject: | Re: 1125R Whats missing here please ? |
It's fine. Probably used for holding it down during transport from Rotax. Mine's got witness marks on it too |
Author: | Hugh2170 [ 13 Aug 2010 16:17 ] |
Post subject: | Re: 1125R Whats missing here please ? |
Thank you both. It just had a service at Riders in Bridgwater and I wondered if they had taken something off and not replaced it. After all, they drained the oil out and failed to replace all of that. 0.45 litres so far to get it between the marks on a hot test. Beginning to lose faith.............. Can anyone recommend a dealer near to me who can look after a bike properly, and not risk mine and other lives. |
Author: | albert666 [ 13 Aug 2010 22:54 ] |
Post subject: | Re: 1125R Whats missing here please ? |
that don't sound too good, tubbs is your nearest for someone you'll know will do a good job |
Author: | jonnyboyrebel [ 13 Aug 2010 23:00 ] |
Post subject: | Re: 1125R Whats missing here please ? |
take Jaffa Cakes |
Author: | Jill Brown [ 13 Aug 2010 23:02 ] |
Post subject: | Re: 1125R Whats missing here please ? |
....or jelly babies... |
Author: | Nutah [ 14 Aug 2010 09:18 ] |
Post subject: | Re: 1125R Whats missing here please ? |
..Hugh you will find Tubbs here.. http://www.moorespeedracing.com/ |
Author: | jayz [ 16 Aug 2010 05:09 ] |
Post subject: | Re: 1125R Whats missing here please ? |
Hugh - same thing happened to me (2010 CR). I've now topped up almost 600 ml and still can't see it between the markers on the cold check. It's at the lower end when i perform the hot check. My mechanic wasn't aware that it was a 2010 model which requires more oil Just hope the motor is OK as it's only done 500 kms! I too found a few unused threaded holes when inspecting my bike after service but have checked the manual and looks like there's nothing meant to be screwed in those holes. |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |