...in fitting one of these?
Apologies if anyone from here is bidding...
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| M2 - is there any point... https://ukbeg.com/forum/viewtopic.php?f=7&t=8052 |
Page 1 of 1 |
| Author: | smarty [ 17 Aug 2010 13:12 ] |
| Post subject: | M2 - is there any point... |
...in fitting one of these? Apologies if anyone from here is bidding...
|
|
| Author: | bueller ball breaker [ 17 Aug 2010 14:43 ] |
| Post subject: | Re: M2 - is there any point... |
I have the 2 plug later version on mine 
|
|
| Author: | pash [ 17 Aug 2010 15:28 ] |
| Post subject: | Re: M2 - is there any point... |
Someone can probably help out here, but I would think this unit will give you a higher rev limit and a more advanced ignition curve. I found on my S1 that I wanted a more retarded curve (sure, I have a reduced squish clearance and different head to you). I think you would be better off with a Dynatek (or Screaming Eagle) unit and a trip to visit Tubbs to pick the right jet and curve. |
|
| Author: | mojomick [ 17 Aug 2010 21:05 ] |
| Post subject: | Re: M2 - is there any point... |
It allows you to rev to 6800rpm instead of 6300rpm. Usually fitted in conjunction with the full race kit, ie. filter, headers and silencer (on an S1 anyway). HTH. |
|
| Author: | Spook [ 17 Aug 2010 22:08 ] |
| Post subject: | Re: M2 - is there any point... |
|
|
| Author: | pash [ 17 Aug 2010 22:26 ] |
| Post subject: | Re: M2 - is there any point... |
My S1 revs to 6800 with the standard ignition, are you saying it is better than the M2 ignition? |
|
| Author: | smarty [ 17 Aug 2010 22:30 ] |
| Post subject: | Re: M2 - is there any point... |
Thanks for the helpful replies  The HSR42 made a massive difference to the bikes performance, I think I'll leave it there for now..... what I really need is a rev counter  .
|
|
| Author: | Adam [ 17 Aug 2010 22:43 ] |
| Post subject: | Re: M2 - is there any point... |
smarty wrote: Thanks for the helpful replies The HSR42 made a massive difference to the bikes performance, I think I'll leave it there for now..... what I really need is a rev counter .No you don't  A big aircooled V twin 'talks' to you 
|
|
| Author: | smarty [ 17 Aug 2010 23:06 ] |
| Post subject: | Re: M2 - is there any point... |
It sounds like its screaming at me...... just before it hits the limiter
|
|
| Author: | mich [ 18 Aug 2010 12:11 ] |
| Post subject: | Re: M2 - is there any point... |
How about getting some James N4 cams for it? Just like the ones fitted to X1 by default? That should spice things up a bit.
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|