yourguitarhero wrote:
If you still can't get it I can post a pic tommorow.
I suspect he sorted it 6 months ago
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| uly 07/57 how to adjust headlamp height angle for mot https://ukbeg.com/forum/viewtopic.php?f=7&t=8929 |
Page 1 of 1 |
| Author: | hartbeat [ 02 Nov 2010 12:29 ] |
| Post subject: | uly 07/57 how to adjust headlamp height angle for mot |
how to adjust headlamp angle on uly thanks |
|
| Author: | yourguitarhero [ 04 Nov 2010 10:39 ] |
| Post subject: | Re: uly 07/57 how to adjust headlamp height angle for mot |
There's a screw on the underside of the two headlights you loosen, adjust the headlights then tighten it again. |
|
| Author: | yourguitarhero [ 28 Apr 2011 13:09 ] |
| Post subject: | Re: uly 07/57 how to adjust headlamp height angle for mot |
The headlights pivot. Underneath the light unit is a metal slider with a black torx head bolt. Loosen that then you can change the angle of the lights. Can't remember off the top of my head if you have to loosen the pivots. If you do they are accessed at the side of the light unit through a big hole. You can use the torx key from your toolbox. If you still can't get it I can post a pic tommorow. |
|
| Author: | Bonzo [ 28 Apr 2011 13:15 ] |
| Post subject: | Re: uly 07/57 how to adjust headlamp height angle for mot |
yourguitarhero wrote: If you still can't get it I can post a pic tommorow. I suspect he sorted it 6 months ago
|
|
| Author: | hartbeat [ 28 Apr 2011 16:31 ] |
| Post subject: | Re: uly 07/57 how to adjust headlamp height angle for mot |
thanks for the info and for taking the time to reply; yes i did sort it a little time ago |
|
| Author: | yourguitarhero [ 29 Apr 2011 09:28 ] |
| Post subject: | Re: uly 07/57 how to adjust headlamp height angle for mot |
Someone else had PM'd me looking for info on it - hence the thread bump |
|
| Author: | ant69 [ 29 Apr 2011 12:16 ] |
| Post subject: | Re: uly 07/57 how to adjust headlamp height angle for mot |
i cannot tell a lie - it woz me ! illuminating the lower branches of trees far and wide. thanks for the bump - i will have another look. |
|
| Author: | ant69 [ 02 May 2011 18:37 ] |
| Post subject: | Re: uly 07/57 how to adjust headlamp height angle for mot |
with mine, it looks as though the bolt that need to be loosened is the tiny vertical torx screw that protrudes through to the underneath of the mudguard - that sits in a front-to-back slot which will allow the light unit to pivot up and down ( a small amount ). i can see the larger pivot torx screws, accessible through the holes in the cowling, if they need to be loosened. thanks for the help. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|