http://cgi.ebay.co.uk/Buell-S1-Banke-Fr ... 336291d727
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| How much https://ukbeg.com/forum/viewtopic.php?f=7&t=9058 |
Page 1 of 2 |
| Author: | kevmean [ 15 Nov 2010 19:55 ] |
| Post subject: | How much |
| http://cgi.ebay.co.uk/Buell-S1-Banke-Fr ... 336291d727 |
|
| Author: | chris(madrid) [ 15 Nov 2010 20:24 ] |
| Post subject: | Re: How much |
Mmmm - maybe I should sell mine and buy a welder! |
|
| Author: | Adam [ 15 Nov 2010 21:28 ] |
| Post subject: | Re: How much |
That's nowt. I called in the Ducati dealer on the way home tonight to buy a crank turning tool so I could fit some new belts. The greedy fekers wanted over £60 for one. It took me 1/2 hour in the shed, incl brew + smoke, to knock one up from an old socket and a big nut. 
|
|
| Author: | restone [ 15 Nov 2010 21:38 ] |
| Post subject: | Re: How much |
Thats 29mins smoking and 1min fetling, then 2 days wondering how the fuck it works 
|
|
| Author: | Adam [ 15 Nov 2010 21:43 ] |
| Post subject: | Re: How much |
|
|
| Author: | Nate [ 15 Nov 2010 22:04 ] |
| Post subject: | Re: How much |
That would of been 15mins then with just bacca  N. |
|
| Author: | spen [ 15 Nov 2010 22:08 ] |
| Post subject: | Re: How much |
Was it the big nut that holds the welder..... 
|
|
| Author: | Adam [ 15 Nov 2010 22:12 ] |
| Post subject: | Re: How much |
Right, that's it..........if you lot are just going to take the piss......
|
|
| Author: | WILLYBUELL [ 15 Nov 2010 23:03 ] |
| Post subject: | Re: How much |
Adam wrote: That's nowt. I called in the Ducati dealer on the way home tonight to buy a crank turning tool so I could fit some new belts. The greedy fekers wanted over £60 for one. It took me 1/2 hour in the shed, incl brew + smoke, to knock one up from an old socket and a big nut. home grown is always BEST yeeeeeee haaaaaaaaaaa |
|
| Author: | albert666 [ 15 Nov 2010 23:07 ] |
| Post subject: | Re: How much |
WILLYBUELL wrote: Adam wrote: That's nowt. I called in the Ducati dealer on the way home tonight to buy a crank turning tool so I could fit some new belts. The greedy fekers wanted over £60 for one. It took me 1/2 hour in the shed, incl brew + smoke, to knock one up from an old socket and a big nut. home grown is always BEST yeeeeeee haaaaaaaaaaa the parts or the smokes?? 
|
|
| Author: | Beef [ 16 Nov 2010 00:36 ] |
| Post subject: | Re: How much |
Both in Willys world 
|
|
| Author: | daywalker [ 17 Nov 2010 20:43 ] |
| Post subject: | Re: How much |
Only one person wanted it too rich for the UKBEG then. |
|
| Author: | breeze [ 17 Nov 2010 21:14 ] |
| Post subject: | Re: How much |
Adam wrote: That's nowt. I called in the Ducati dealer on the way home tonight to buy a crank turning tool so I could fit some new belts. The greedy fekers wanted over £60 for one. It took me 1/2 hour in the shed, incl brew + smoke, to knock one up from an old socket and a big nut. Hi Adam, what Ducati do you have? I didn't need any tool when doing the belts on the monster, just set it up then lock the cams to the cases. |
|
| Author: | Adam [ 17 Nov 2010 22:19 ] |
| Post subject: | Re: How much |
breeze wrote: Adam wrote: That's nowt. I called in the Ducati dealer on the way home tonight to buy a crank turning tool so I could fit some new belts. The greedy fekers wanted over £60 for one. It took me 1/2 hour in the shed, incl brew + smoke, to knock one up from an old socket and a big nut. Hi Adam, what Ducati do you have? I didn't need any tool when doing the belts on the monster, just set it up then lock the cams to the cases. It's for turning the end of the crank, to line the marks up. Easier than turning the wheel with it in gear. A lot less hassle when checking valve clearances too. |
|
| Author: | spen [ 18 Nov 2010 06:33 ] | ||
| Post subject: | Re: How much | ||
..
|
|||
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|