UK Buell Enthusiasts Group :: S1 rear brake pad clip

Are you on about the clip that hold the small pad in the piston?
If you are, I think you'll need a new set.
I had one come off but luckily they were due changing anyway

Yeah, I forgot there's 2 types of S1 caliper :!:

Whats that all about then?

Have you got the part number (and a nice exploded diagram) for the slotted cover that covers the pin that holds the pads in the Nissin front caliper for my S1? Mine got a bit chewed last weekend when taking the pads out to remove the wheel to fit the X1 forks.

Author:	restone [ 02 Feb 2011 22:20 ]
Post subject:	S1 rear brake pad clip
While fitting new pads my retention clip broke and is making a scraping noise. As its a standard Nissin caliper can I get a replacement from an EBC supplier, I think the local bike shop gets deliveries from one. If not anyone got any ideas?

Author:	Beef [ 02 Feb 2011 22:30 ]
Post subject:	Re: S1 rear brake pad clip
Are you on about the clip that hold the small pad in the piston? If you are, I think you'll need a new set. I had one come off but luckily they were due changing anyway

Author:	Adam [ 02 Feb 2011 23:17 ]
Post subject:	Re: S1 rear brake pad clip
A lot of the components on my VTR are the same as on the Buell caliper, and they're the same as on some types of Blade. You might be able to cross match.

Author:	restone [ 03 Feb 2011 00:25 ]
Post subject:	Re: S1 rear brake pad clip
Its number 15

Author:	pash [ 03 Feb 2011 00:41 ]
Post subject:	Re: S1 rear brake pad clip
Part number H0107.F. Give Nobby a call at Black Bear and get it ordered, I bet you can get it for less than a fiver...

UK Buell Enthusiasts Group https://ukbeg.com/forum/

S1 rear brake pad clip https://ukbeg.com/forum/viewtopic.php?f=7&t=9802	Page 1 of 3

Author:	pash [ 03 Feb 2011 00:44 ]
Post subject:	Re: S1 rear brake pad clip
Beef wrote: Are you on about the clip that hold the small pad in the piston? If you are, I think you'll need a new set. I had one come off but luckily they were due changing anyway You is on about the Brembo (which I think rocks harder than the Nissin) I think... Twas shite with organic pads, but now, with Goldfren tis well good. Ferodo make sintered pads for them too...

Author:	Beef [ 03 Feb 2011 09:47 ]
Post subject:	Re: S1 rear brake pad clip
Yeah, I forgot there's 2 types of S1 caliper

Author:	chris(madrid) [ 03 Feb 2011 16:35 ]
Post subject:	Re: S1 rear brake pad clip
Beef wrote: Yeah, I forgot there's 2 types of S1 caliper & neither brakes as such.

Author:	pash [ 05 Apr 2011 18:00 ]
Post subject:	Re: S1 rear brake pad clip
Bo! http://by154w.bay154.mail.live.com/defa ... wsignin1.0

Author:	daywalker [ 05 Apr 2011 18:43 ]
Post subject:	Re: S1 rear brake pad clip
Whats that all about then? Have you got the part number (and a nice exploded diagram) for the slotted cover that covers the pin that holds the pads in the Nissin front caliper for my S1? Mine got a bit chewed last weekend when taking the pads out to remove the wheel to fit the X1 forks.

Author:	TOPGUMM [ 05 Apr 2011 18:59 ]
Post subject:	Re: S1 rear brake pad clip
http://cgi.ebay.com/ebaymotors/HD-BUELL ... 3a64d1a478

Author:	Adam [ 05 Apr 2011 19:41 ]
Post subject:	Re: S1 rear brake pad clip
daywalker wrote: Whats that all about then? Have you got the part number (and a nice exploded diagram) for the slotted cover that covers the pin that holds the pads in the Nissin front caliper for my S1? Mine got a bit chewed last weekend when taking the pads out to remove the wheel to fit the X1 forks. Honda VTR ones fit

Author:	pash [ 05 Apr 2011 20:58 ]
Post subject:	Re: S1 rear brake pad clip
daywalker wrote: Whats that all about then? Have you got the part number (and a nice exploded diagram) for the slotted cover that covers the pin that holds the pads in the Nissin front caliper for my S1? Mine got a bit chewed last weekend when taking the pads out to remove the wheel to fit the X1 forks. 44320-98Y, but looks like it is NLA. I am not sure if Adam is referring to front or rear, but worth looking into, apart from that, how about MV Agusta? How did you chew it up?

Author:	daywalker [ 05 Apr 2011 22:11 ]
Post subject:	Re: S1 rear brake pad clip
It was stuck solid. Got it out but had to tap at it with knock through flathead on the side so the slot is not regular any more. Still works but looks crap. Will try for the VTR ones. Would have thought that they were universal to Nissin calipers will find out.

Page 1 of 3	All times are UTC
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/