Hi All
What is the best method of raising bar height by about 2 inches ? M2 cyclone
Thanks

Take your seat off .

_________________
Ride Safe & Stay between the hedgerows.

Perhaps try S3 bars?

_________________
Try doing this to yer fueller...........

Used renthal bars to gain height as bar risers would not fit spondon yokes . Check there`s enough on throttle side to take throttle and brake unit (200 ish mm I think )

Thanks for the input

Having some made for my X1, as said ones sold don’t fit spondon yokes. Also you will need Longer hoses for the brake as there not long enough to accommodate risers.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Rox risers

_________________
Bob Krzeszkiewicz
2012 XR1200X - 2011 Kawasaki Z1000SX - 1999 Buell X1

Export Bonnie bars do the job.

_________________
'98 M2 Razorback, it's a keeper.

Indeed, but you need to be ancient to know they are.

_________________
Try doing this to yer fueller...........

Export Bonnie bars do the job.[/quote]
Indeed, but you need to be ancient to know they are.[/quote]

I am.......and I do know what they are.

Thanks for all your input