UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
Need X1 ecm race map https://ukbeg.com/forum/viewtopic.php?f=8&t=11635 |
Page 1 of 1 |
Author: | Harald [ 13 Jul 2011 01:01 ] |
Post subject: | Need X1 ecm race map |
I would like to compare my stock ecm with the original race ecm maps. Would anyone like to share the race maps with me ? (would they load if needed ?) |
Author: | Kev [ 13 Jul 2011 09:22 ] |
Post subject: | Re: Need X1 ecm race map |
I seem to have a map for a JA 120 and K 210 race ecm... Not sure if that helps What ecm model do you have? |
Author: | Harald [ 13 Jul 2011 20:34 ] |
Post subject: | Re: Need X1 ecm race map |
Well, I had a look under the seat. The ECM has 3 numbers. Top left, big white paint letters : BFIEC1 Top right, barcode sticker : N0326.Q 00032 Right middle, barcode sticker : EC18JA120 I only see one common part in there and thats the JA120 on the bottom barcode sticker. Is that the info you need ? What do the other numbers mean ? |
Author: | Kev [ 15 Jul 2011 17:04 ] |
Post subject: | Re: Need X1 ecm race map |
When you plug in ecmspy, the ecm number type will appear on the eeprom page on the top right. |
Author: | pash [ 15 Jul 2011 19:07 ] |
Post subject: | Re: Need X1 ecm race map |
IIRC there is only one race map and it will work in either. |
Author: | Harald [ 15 Jul 2011 20:24 ] |
Post subject: | Re: Need X1 ecm race map |
Firmware version : BUEJA120 |
Author: | pash [ 15 Jul 2011 21:00 ] |
Post subject: | Re: Need X1 ecm race map |
Maps as below Code: <?xml version="1.0" encoding="ISO-8859-1"?> You also need to set your rev limiters as: Attachment: revlimit.jpg [ 7.31 KiB | Viewed 1364 times ] |
Author: | Harald [ 16 Jul 2011 20:08 ] |
Post subject: | Re: Need X1 ecm race map |
Cheers ! |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |