Hi can anyone tell me the number for head race bearings for a 2009 xb12xt many thanks..

E0002.02A8

£63.76 incl. vat for the pair.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Bugger.. thanks Maz...

what are the symptoms of knackered head race bearings,,and how can i check for sure before commiting to spending my cash potts

Jack up the front end and turn the handlebars

nice and smooth no "notchy" feel = OK
if not nice and smooth = bearings bolloxed

Mine lasted for 19K miles and were toast

Mark

Kevmean has some bearings very cheap and very good quality not sure if he has what you want but worth a try.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Kevmean does not have XB head bearings, they're H-D only
If your bike has done 10K, then the bearings are toast.......contrary to what Markp sez, you will not be able to tell by his 'method'.......only way to check them is strip the front end to the point where only the yokes are still in the frame.......at which point you may as well replace them anyway.
.......and whilst you're at it, service the forks to, will be like riding a new bike when you're done (assuming you do it all correctly)

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

thanks Maz...just ordered a pair from the local HD shop same price you quoted..... you are correct cannot tell by moving the forks but they do not seem to move a freely as they should.. thanks for your help potts

they're H-D only i use von shacklefords

_________________
IF IT BLEEDS WE CAN KILL IT ,THIS STUFF WILL MAKE YOU A GODDAM SEXUAL TYRANASURUS ,YOUVE BEEN PUSHING TOO MANY PENCILS DILLON .GET TO THE CHOPPER

enlighten me more please