UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Brake light on Ully
https://ukbeg.com/forum/viewtopic.php?f=8&t=12444		 Page 1 of 1
Author:  cyril [ 30 Sep 2011 19:46 ]
Post subject:  Brake light on Ully
The brake light is on the whole time whether the either brake is on or off XB Ully where to start ?
Author:  Nutah [ 30 Sep 2011 19:52 ]
Post subject:  Re: Brake light on Ully
do you know if it's front or rear switch ?

try unplugging the front switch , which IIRC has small female spade terminals
if its still on try unplugging the rear one
Author:  pash [ 30 Sep 2011 19:53 ]
Post subject:  Re: Brake light on Ully
Disconnect each switch in turn... Check the brake light...
Author:  sportster_mann [ 30 Sep 2011 21:11 ]
Post subject:  Re: Brake light on Ully
Washed the bike recently ? Or been riding in rain ? Check that water hasn't collected in the "well" where the wiring goes into the rear brake switch - it happened to me. If so dry it out and fill it with something to stop water from getting in ...
Author:  cyril [ 02 Oct 2011 00:23 ]
Post subject:  Re: Brake light on Ully
Thanks guys i will give them both a look.
Author:  cyril [ 02 Oct 2011 20:59 ]
Post subject:  Re: Brake light on Ully
interestingly the brake light is working perfectly whilst ignition is switched on but a racing pulse effect when the motor is running front or rear brake applied ?
Author:  stinkerbill [ 12 Oct 2011 09:00 ]
Post subject:  Re: Brake light on Ully
Sounds like a dodgy connection.

In any case, here's 3 simple things to check...

- Bulb (both filaments need to be working. One for tail light, one for breaking
- Fuse (think it's the 'AAC' one)
- Connections to the light unit - there's 3 wires leading to the light unit and mine went a bit 'pulsey' after doing my bomber conversion...

...nothing at all to do with my insufficient wiring :oooops:
Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/