| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| HELP-PANIC-Tuber misfire. https://ukbeg.com/forum/viewtopic.php?f=8&t=13528 |
Page 1 of 1 |
| Author: | chris(madrid) [ 04 Feb 2012 09:40 ] |
| Post subject: | HELP-PANIC-Tuber misfire. |
Help Having trouble with the S3T. It fires up fine but when the rev's raise up to above 3000 it starts to misfire and the rev counter starts to waggle up and down. Feels as if it's simply not firing. It's the first time I've been able to fire it and rev it sine I bust my wrist Neutral light also flickers a bit - ANY IDEAS? - Cut outs? Bit of a bugger as it's potential new daddy is here looking at it. Another UKBEG'r but it's still bloody annoying. |
|
| Author: | gunter [ 04 Feb 2012 09:52 ] |
| Post subject: | Re: HELP-PANIC-Tuber misfire. |
CPS failure? |
|
| Author: | chris(madrid) [ 04 Feb 2012 13:55 ] |
| Post subject: | Re: HELP-PANIC-Tuber misfire. |
Bridging the clutch cut-out seems to have solved it. Bloody annoying though. Anybody know if the switches are available - or will bridging have to be the final solution? |
|
| Author: | pash [ 04 Feb 2012 14:04 ] |
| Post subject: | Re: HELP-PANIC-Tuber misfire. |
I would be looking at the neutral light switch, diode or harness. The clutch switch is there to allow you start in gear... |
|
| Author: | chris(madrid) [ 04 Feb 2012 16:44 ] |
| Post subject: | Re: HELP-PANIC-Tuber misfire. |
pash wrote: I would be looking at the neutral light switch, diode or harness. Yup - I've been wondering about the neutral switch too, pash.
|
|
| Author: | ant69 [ 07 Feb 2012 11:03 ] |
| Post subject: | Re: HELP-PANIC-Tuber misfire. |
Assuming its simple to do, i should probably change the neutral switch anyway:- 1) are they still available ? 2) best place to get one ? |
|
| Author: | gusm2 [ 07 Feb 2012 15:02 ] |
| Post subject: | Re: HELP-PANIC-Tuber misfire. |
pash wrote: I would be looking at the neutral light switch, diode or harness. Isn´t the clutch lock out switch there to stop you starting it in gear without pulling in the clutch first, same as the side stand one is there to stop you riding off without first raising the stand.........judging the amount of posts on here regarding said switches I´m surprised you havn´t got rid of them before now......and as an experienced rider do you really need thempash wrote: The clutch switch is there to allow you start in gear...
|
|
| Author: | chris(madrid) [ 07 Feb 2012 18:05 ] |
| Post subject: | Re: HELP-PANIC-Tuber misfire. |
ant69 wrote: Assuming its simple to do, i should probably change the neutral switch anyway:- Cant see why not, ant. 1) are they still available ? 2) best place to get one ? Bog Standard Harley Sportster part. So any Harley dealer. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|