| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Lightning body panels https://ukbeg.com/forum/viewtopic.php?f=8&t=13716 |
Page 1 of 1 |
| Author: | MRKTHROWER [ 26 Feb 2012 17:42 ] |
| Post subject: | Lightning body panels |
Can any one tell me if the body panels from a firebolt fit a lightning and visa versa as I wish to get a complete spare set and have them custom sprayed. Are there any differences in the tank cover front fender etc cheers regards Kevin |
|
| Author: | Nutah [ 26 Feb 2012 18:14 ] |
| Post subject: | Re: Lightning body panels |
yes BUT a few things you need to remember XBS has the ignition on the side the XBR it is in the top yoke the later "tank" cover has a vent mesh around the filler neck so depends on the year i think 06 onwards has the mesh a Firebolt tail on an XBS there are space issues for the wiring & fuse panel IF you are putting an S tail on a Firebolt OK it can all be done |
|
| Author: | MRKTHROWER [ 26 Feb 2012 21:26 ] |
| Post subject: | Re: Lightning body panels |
Thank you for your help |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|