| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Neutral light not working https://ukbeg.com/forum/viewtopic.php?f=8&t=1398 |
Page 1 of 1 |
| Author: | Mitch [ 03 Jul 2009 09:08 ] |
| Post subject: | Neutral light not working |
When the engine is warm :s not desperately worried about it, more bemused, baffled, or even amused. Only started happening recently. 07 xb12 btw |
|
| Author: | pash [ 03 Jul 2009 09:58 ] |
| Post subject: | Re: Neutral light not working |
Check the connector under the front sprocket. Mine was loose after a trip to the dealers for some warranty work and I saw the same effects... |
|
| Author: | norrie [ 03 Jul 2009 14:47 ] |
| Post subject: | Re: Neutral light not working |
It's quite common for it to fail and you have to remove the front sprocket to change it. Funnily enough though mines stopped working for a while and now it's okay again. |
|
| Author: | Rays [ 04 Jul 2009 01:54 ] |
| Post subject: | Re: Neutral light not working |
Don't know about the clearance on other models but on the 12X you can modify a socket to be offset a little and it works a treat. When mine started playing up (it can also cause the machine gun starter symptom) I changed it when I had the rear wheel off doing a tyre change and with the belt out of the way it is literally a five minute job. 
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|