I have a flat spot on my 2010 uly XT at 4500revs, it disappears after 5000, only changes done are one of alans cans and a K & N air filter.
Help please
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Flat spot https://ukbeg.com/forum/viewtopic.php?f=8&t=14290 |
Page 1 of 1 |
| Author: | jonnyingram [ 28 Apr 2012 21:36 ] |
| Post subject: | Flat spot |
I have a flat spot on my 2010 uly XT at 4500revs, it disappears after 5000, only changes done are one of alans cans and a K & N air filter. Help please
|
|
| Author: | pash [ 28 Apr 2012 21:50 ] |
| Post subject: | Re: Flat spot |
What answer would you like? |
|
| Author: | jonnyingram [ 28 Apr 2012 22:01 ] |
| Post subject: | Re: Flat spot |
How to get rid of it. |
|
| Author: | WILLYBUELL [ 28 Apr 2012 23:22 ] |
| Post subject: | Re: Flat spot |
basics ,was it there when you first got the bike ,did you fit filter and exaust together,,now a flat spot ,or one then the other ,more info needed dude , |
|
| Author: | jonnyingram [ 28 Apr 2012 23:39 ] |
| Post subject: | Re: Flat spot |
Not there with original gear. Only after fitting both new components together 
|
|
| Author: | WILLYBUELL [ 28 Apr 2012 23:47 ] |
| Post subject: | Re: Flat spot |
right well one or both are causing the prob ,you need to change either the exaust or the filter and see which alterd your fueling the most ,time to start swaping bits dude 
|
|
| Author: | jonnyingram [ 29 Apr 2012 00:01 ] |
| Post subject: | Re: Flat spot |
Ok thanks Wullie |
|
| Author: | cooter [ 29 Apr 2012 21:15 ] |
| Post subject: | Re: Flat spot |
Do you have the latest Buell ECM flash? Being a 2010 model you probably do but worth checking with Black Bear. |
|
| Author: | cooter [ 29 Apr 2012 21:18 ] |
| Post subject: | Re: Flat spot |
Oops  just read flat spot two the sequel and Jon64 has given the same answer.
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|