UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Xb 9 exhaust
https://ukbeg.com/forum/viewtopic.php?f=8&t=14308		 Page 1 of 2
Author:  mar5hy [ 01 May 2012 19:09 ]
Post subject:  Xb 9 exhaust
How do..

Normally I build 2 stroke exhausts..so I set about making a section so I could use a scorpion race can.
It looks similar to the jardine can.
It's load, very load and I'm sure it needs a new map, can anyone help me with a cable?

Marshy
Author:  pash [ 01 May 2012 19:48 ]
Post subject:  Re: Xb 9 exhaust
I have ordered some bits to make you one.
Author:  mar5hy [ 01 May 2012 21:34 ]
Post subject:  Re: Xb 9 exhaust
Cheers pash...
Author:  albert666 [ 02 May 2012 23:22 ]
Post subject:  Re: Xb 9 exhaust
a nice two stroke
Image
Author:  mar5hy [ 03 May 2012 10:33 ]
Post subject:  Re: Xb 9 exhaust
What engine is that fitted to Albert..?
Author:  mar5hy [ 03 May 2012 13:42 ]
Post subject:  Re: Xb 9 exhaust
mar5hy wrote:
How do..

Normally I build 2 stroke exhausts..so I set about making a section so I could use a scorpion race can.
It looks similar to the jardine can.
It's load, very load and I'm sure it needs a new map, can anyone help me with a cable?

Marshy


Loud...not load
Author:  mar5hy [ 03 May 2012 14:43 ]
Post subject:  Re: Xb 9 exhaust
few bits i recently did there...

Attachments:
IMG_1146.JPG
IMG_1146.JPG [ 1.41 MiB | Viewed 666 times ]
File comment: Love fusion
P1030499.JPG
P1030499.JPG [ 1.36 MiB | Viewed 666 times ]
P1030473.JPG
P1030473.JPG [ 1.33 MiB | Viewed 666 times ]
Author:  pash [ 03 May 2012 15:02 ]
Post subject:  Re: Xb 9 exhaust
That's nice.

My dad used to hydroform them for his two stroke engined hillclimb cars.
Author:  mar5hy [ 03 May 2012 15:07 ]
Post subject:  Re: Xb 9 exhaust
I know a few guys that do that...but only one guy who mastered it...

Some crazy formulas go into the development.

How's the cable coming on pash?

Where will i get the mono software from for my bike?
Author:  Adam [ 03 May 2012 15:21 ]
Post subject:  Re: Xb 9 exhaust
mar5hy wrote:
What engine is that fitted to Albert..?



Saab?
Author:  pash [ 03 May 2012 15:24 ]
Post subject:  Re: Xb 9 exhaust
Mono software from http://www.ecmspy.com. Waiting for parts for your cable.

My dad was quite good at it, but the installation in a car with an RG500 engine was probably a little easier than your installation there.

There was a chap called Derek Huxley that was popular for doing it too.
Author:  WILLYBUELL [ 03 May 2012 16:55 ]
Post subject:  Re: Xb 9 exhaust
pash wrote:
That's nice.

My dad used to hydroform them for his two stroke engined hillclimb cars.

had the pleasure of an afternoon with peter gibson ,very very nice man in 1988 ,first time id encouterd hydrofromng COOOOOL AS FUCK (asked him if he could reshape me trouser snake with hydroforming ............declined :sad1: ) :D :D
Author:  Adam [ 03 May 2012 17:26 ]
Post subject:  Re: Xb 9 exhaust
WILLYBUELL wrote:
pash wrote:
That's nice.

My dad used to hydroform them for his two stroke engined hillclimb cars.

had the pleasure of an afternoon with peter gibson ,very very nice man in 1988 ,first time id encouterd hydrofromng COOOOOL AS FUCK (asked him if he could reshape me trouser snake with hydroforming ............declined :sad1: ) :D :D



I remember Gibson spannies when I were a lad :yup:
Author:  albert666 [ 03 May 2012 18:08 ]
Post subject:  Re: Xb 9 exhaust
mar5hy wrote:
What engine is that fitted to Albert..?


auto union, dkw summit like that, done a couple of oddball old cars
Author:  barney [ 03 May 2012 18:11 ]
Post subject:  Re: Xb 9 exhaust
ran a gibson pipe with some 36mm mikuni smoth bores back in the old days of racing, very nice pipe headers appeared to be fabricated from sheet rather than pipe
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/