UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Forking Bushes!!
https://ukbeg.com/forum/viewtopic.php?f=8&t=14339		 Page 1 of 1
Author:  Devonbob [ 04 May 2012 13:06 ]
Post subject:  Forking Bushes!!
I am part way through rebuilding my 2004 model XB12s forks and have hit a snag.

According to my parts book the slider bushes are J8140,02A8 and the ones I was supplied with were in a sealed bag with the that part number printed on it.

The ones that arrived are 45.25 OD x 19.75 long but the old ones are 47.25 OD x 14.8 long.

I have checked with the supplier and they confirmed that the part number is correct and are looking in to where the error is.

Has anyone out there had a similar experience or knows what the true part number is?

Cheers

Bob
Author:  pash [ 04 May 2012 13:17 ]
Post subject:  Re: Forking Bushes!!
Forks changed from 41mm to 43mm on 2005 model year.
Author:  Maz [ 04 May 2012 13:19 ]
Post subject:  Re: Forking Bushes!!
8140 is the guide bush, slide bush is J8138.02A8
Author:  Devonbob [ 04 May 2012 13:23 ]
Post subject:  Re: Forking Bushes!!
Maz wrote:
8140 is the guide bush, slide bush is J8138.02A8



Quite right I meant guide bush :oooops:
Author:  Maz [ 04 May 2012 13:24 ]
Post subject:  Re: Forking Bushes!!
......and as Pash says, if it's the later fork the slide bush is J8138.3A8 and the guide bush is 46343-06......are the seals correct ?
Author:  Devonbob [ 04 May 2012 13:32 ]
Post subject:  Re: Forking Bushes!!
pash wrote:
Forks changed from 41mm to 43mm on 2005 model year.


It look like my bike is actually 05 going on the VIN no. So you were bang on Nick. 8140.03A8 is the next part to get in and try.

Anyone got a 05 parts book for an XB12s?
Author:  Devonbob [ 04 May 2012 13:33 ]
Post subject:  Re: Forking Bushes!!
Maz wrote:
......and as Pash says, if it's the later fork the slide bush is J8138.3A8 and the guide bush is 46343-06......are the seals correct ?


I'll check
Author:  Devonbob [ 04 May 2012 13:39 ]
Post subject:  Re: Forking Bushes!!
Yep new oil seals and slide bushes. Bugger

Thanks for the help
Author:  pash [ 04 May 2012 13:46 ]
Post subject:  Re: Forking Bushes!!
I am pretty sure all those parts are as X1 and later S3 (and maybe even M2 even though their forks are the other way up), so you may find someone on here will take then off your hands.

If you are in a rush to get bushes and seals and you can't find Buell stuff, may be worth visiting your Honda dealer as these will be common with CBRs etc. with 43mm forks.
Author:  Devonbob [ 04 May 2012 14:14 ]
Post subject:  Re: Forking Bushes!!
Thanks for that Nick. I've been getting the bits and pieces from Black Bear and they said that they would take back anything not used, can't say fairer than that :)
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/