UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
m2 cuts out on left hand lock https://ukbeg.com/forum/viewtopic.php?f=8&t=1465 |
Page 1 of 1 |
Author: | muzza [ 06 Jul 2009 19:08 ] |
Post subject: | m2 cuts out on left hand lock |
took the '00m2 out over the weekend and when the bike goes onto full left lock it cuts out. has never done this before and im wondering where to start looking or if its a common problem? cheers ![]() |
Author: | Maz [ 06 Jul 2009 20:51 ] |
Post subject: | Re: m2 cuts out on left hand lock |
Wiring harness will be chaffed by the steering head brackets on the frame ? |
Author: | DrBuella [ 07 Jul 2009 19:45 ] |
Post subject: | Re: m2 cuts out on left hand lock |
The easiest way to fix this is never to take a left hand turn ![]() |
Author: | muzza [ 07 Jul 2009 21:07 ] |
Post subject: | Re: m2 cuts out on left hand lock |
well checked over the wiring by the headstock and whilst not really chaffed the is one purple wire showing that looks like it got trapped. i have cable tied the bunch together and will see if that works. just thinking could it be the clutch switch? also have a new clutch cable and it just doesnt look right(the routing) it also makes a rubbing sound and has taken the paint off the back of the headlight. any ideas? it was fitted by guildford hdb. cheers, muzz |
Author: | Spook [ 08 Jul 2009 16:07 ] |
Post subject: | Re: m2 cuts out on left hand lock |
I can send you a photo of the routing on my X1 if it's any help |
Author: | muzza [ 08 Jul 2009 19:27 ] |
Post subject: | Re: m2 cuts out on left hand lock |
nice one spook. its really behind the headlight to the bar thats not right. it seems its too long. its the later xb cable its the same as the ones maz supplies. i just had one made up from nz and i shouldve got it made shorter ![]() ![]() |
Author: | Norm [ 08 Jul 2009 21:46 ] |
Post subject: | Re: m2 cuts out on left hand lock |
muzza wrote: honda doing a 0% deal at the mo ![]() Honda always have that. As in 0% of the shitz'n'gigglez of a Buell. ![]() |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |