UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
Cyclone parts list https://ukbeg.com/forum/viewtopic.php?f=8&t=15244 |
Page 1 of 1 |
Author: | shedlover [ 12 Aug 2012 14:42 ] |
Post subject: | Cyclone parts list |
I don't suppose if anyone knows where I can find an online parts list for my poorly 2001 Cyclone I've had a problem with a poorly fitting seat so bought another seat and seat unit from a 1998 but where the seat meets the tank you can get your fingers in between. So today I picked up a seat from a 2001 Cyclone fits nice and snug on the tank but there is quite a gap between the front of the seat and the seat panel. So I need a parts list to cross reference part numbers to see if I can fathom this out. |
Author: | Nutah [ 12 Aug 2012 17:44 ] |
Post subject: | Re: Cyclone parts list |
Author: | Bonzo [ 12 Aug 2012 18:07 ] |
Post subject: | Re: Cyclone parts list |
shedlover wrote: I've had a problem with a poorly fitting seat so bought another seat and seat unit from a 1998 but where the seat meets the tank you can get your fingers in between. So today I picked up a seat from a 2001 Cyclone fits nice and snug on the tank but there is quite a gap between the front of the seat and the seat panel. So I need a parts list to cross reference part numbers to see if I can fathom this out. The 1998 and the 2001 Cyclones have completely different frames, panels and saddles, so I don't think a parts list is going to help you very much |
Author: | gusm2 [ 12 Aug 2012 18:20 ] |
Post subject: | Re: Cyclone parts list |
...also make sure the locating tongue goes in under the bracket on the frame correctly |
Author: | Dave from Scotland [ 13 Aug 2012 13:58 ] |
Post subject: | Re: Cyclone parts list |
Shedlover, As It happens, I have a spare 2001 M2 seat and seat unit in blue. (Seat is VGC, seat unit is not bad.) Let me know if you are interested. (Also got various other bits: complete front end, might still have the tank but can't remember...) Dave |
Author: | shedlover [ 13 Aug 2012 19:07 ] |
Post subject: | Re: Cyclone parts list |
Thanks chaps for all of your advice - at least I know that I've got the right seat...it's a start Will pm you Dave re parts |
Author: | Dave from Scotland [ 20 Aug 2012 01:04 ] |
Post subject: | Re: Cyclone parts list |
Shedlover, Did you get my PM? Dave |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |