So nobody has a stock BUE2D US ECM?
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Diferences BUE2D USA EU EEPROM https://ukbeg.com/forum/viewtopic.php?f=8&t=15794 |
Page 1 of 1 |
| Author: | mundoxan [ 31 Oct 2012 08:50 ] |
| Post subject: | Diferences BUE2D USA EU EEPROM |
I have installed big headers on my 2009 bike. I've also installed the pro-series pipe and adjust the fuel map from the old race maps. But for other parameters in the ECM, I suppose that I should start form an US configuration instead from the EU one. I found some EEPROM from US but not the BUE2D one, does any one have the stock US BUE2D 2008 or 2009? thanks a lot |
|
| Author: | mundoxan [ 04 Nov 2012 20:37 ] |
| Post subject: | Re: Diferences BUE2D USA EU EEPROM |
So nobody has a stock BUE2D US ECM?
|
|
| Author: | pash [ 04 Nov 2012 20:51 ] |
| Post subject: | Re: Diferences BUE2D USA EU EEPROM |
I have somewhere (I think I have anyway), but I wont be able to do anything with it until Wednesday at the earliest... |
|
| Author: | mundoxan [ 04 Nov 2012 21:23 ] |
| Post subject: | Re: Diferences BUE2D USA EU EEPROM |
pash wrote: I have somewhere (I think I have anyway), but I wont be able to do anything with it until Wednesday at the earliest... Thanks a lot Pash Not in a hurry, take your time  just want to start from and US version than from the EU one (timing and other adjustments...)thanks again |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|