I think you are referring for the store errors. If the fault doesn´t appear after 50 cycles the ECM reset the stored error, but not the whole ECM
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| DDI-3 remapping ? https://ukbeg.com/forum/viewtopic.php?f=8&t=15829 |
Page 1 of 1 |
| Author: | marshy [ 04 Nov 2012 20:12 ] |
| Post subject: | DDI-3 remapping ? |
Hi All, I know that this is a topic that has been discussed in the past, however I thought I'd re-explore the options of remapping the DDI-3 ECM. Previous posts talk about being able to remap this ecm making the bike a lot more rideable, however this is short lived as the ECM will automatically reset itself after x number of ignition (key) cycles. Has this changed and if so has anyone come up with a solution for this? I'd like to put a k&n filter on and possibly mod the exhaust can but don't want to lose any of the ride ability ... As well as sort out some of the low down surging. |
|
| Author: | gunter [ 04 Nov 2012 20:27 ] |
| Post subject: | Re: DDI-3 remapping ? |
marshy wrote: Previous posts talk about being able to remap this ecm making the bike a lot more rideable, however this is short lived as the ECM will automatically reset itself after x number of ignition (key) cycles. Who told you that? That's not true. |
|
| Author: | pash [ 04 Nov 2012 20:32 ] |
| Post subject: | Re: DDI-3 remapping ? |
My fault for not having a DDFI3 bike to show you how easy it is to play... |
|
| Author: | mundoxan [ 04 Nov 2012 20:35 ] |
| Post subject: | Re: DDI-3 remapping ? |
I think you are referring for the store errors. If the fault doesn´t appear after 50 cycles the ECM reset the stored error, but not the whole ECM
|
|
| Author: | marshy [ 04 Nov 2012 21:06 ] |
| Post subject: | Re: DDI-3 remapping ? |
Mmmmmm sounds like I am sorely mistaken. If anyone knows about programming this ECU it will be Gunter or Pash ;0) The whole reason I never invested in the cable and ECMSpy was because of what I was told So guys, answer me this .. Current issues .... Bike pops excessively (not an issue but a pain in the backside) Low speed surging (again not an issue but would be nice to smooth it out slightly) Possible future mods .... K&n filter Albert exhaust Questions .... Will new mappings sort out or improve the above issues? Will I be able to set the bike up once a new filter and exhaust have been fitted? |
|
| Author: | pash [ 04 Nov 2012 21:37 ] |
| Post subject: | Re: DDI-3 remapping ? |
marshy wrote: Bike pops excessively (not an issue but a pain in the backside) Have a look at this marshy wrote: Low speed surging (again not an issue but would be nice to smooth it out slightly) Does a TPS reset help? |
|
| Author: | marshy [ 04 Nov 2012 21:58 ] |
| Post subject: | Re: DDI-3 remapping ? |
Thanks Pash, seems that you and Gunter have got loads on remapping so will call on you when the time comes. On the whole TPS thing On DDFI-3 , is that ignition on , full twist of the throttle 3 times (with ascend interval on each twist) and then ignition off? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|