It is currently 05 Dec 2024 23:13

All times are UTC




Post new topic  Reply to topic  [ 15 posts ] 
Author Message
 Post subject: AST Tuber shocks
PostPosted: 07 May 2013 10:25 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
OK folks , can any of you AST owners confirm which is rebound and which is compression damping on these?
Looks like Muffins is in need of a rebuild which is a bit of a dissapointment as it has lasted less time and milage than the original Showa shock if it does :(
Appears to have lost it's damping so going to have a play with adjusters today before sending it for a rebuild if needed .............. my instructions say that the two adjusaters on the remote are high and low speed REBOUND .............I've heard people say that some of the instructions were printed wrong so just trying to confirm which adjuster is which.

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 07 May 2013 11:07 
Offline
Mr. Tourettes
User avatar

Joined: 06 May 2009 13:51
Posts: 2450
Location: cambs
Smaller is low speed rebound, larger is high speed. At least thats what Ronnie explained to me when we were playing around with my set up for the speed trail around the cones at Lauwe a couple of years back. Just confirmed by digging out instructions.

ps. mine was fitted with a new seal after a couple of thousand miles and is begining to look like it may need doing again, no effect on handling so far.

Hope that helps m8.

_________________
xxxx


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 07 May 2013 17:21 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
Checked it this morning and it definitely needs rebuilding as the main seal looks like it's gone :( so Muffin the pogo stick had to stay at home today whilst the Cr got the ride out to sunny skeggy for Lunch ........... luckily the seat to pillion footrest distance is about the same as the X1 as the girlfriend can only just get on at the moment seeing as it's less than four weeks since she had a new hip fitted lOl ............... she struggled a bit more getting on the Cr though as therear end sits 2" higher than Muffin :D

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 07 May 2013 17:36 
Offline
User avatar

Joined: 06 May 2009 19:42
Posts: 3152
Current ride: M2 Razorback
Location: Mouth of the Port in the Shire of Hamp
kevmean wrote:
...the girlfriend can only just get on at the moment seeing as it's less than four weeks since she had a new hip fitted lOl ............... she struggled a bit more getting on the Cr though as therear end sits 2" higher than Muffin :D

Suggest you follow your own advice on this one, Kev:
in another post, kevmean wrote:
.....just lay it on it's side, stand on one leg and pull the other one to spread them apart to the correct width ............ they aren't very strong so don't take much spreading.

:coat:

_________________
'98 M2 Razorback, it's a keeper.


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 07 May 2013 17:40 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
:rotfl: :rotfl: :rotfl: :hehe:

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 07 May 2013 18:09 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
:yt: :rotfl:

It was me that commented on the instructions being arse about face. It was set up almost perfectly out of the box. Unexpected things started to happen when I had a fiddle with the settings and I could make no sense of it. A quick phone call to Ronnie sorted it all out. Subsequent shocks had the correct info :yup: 8-)

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 07 May 2013 19:46 
Offline
Mr. Tourettes
User avatar

Joined: 06 May 2009 13:51
Posts: 2450
Location: cambs
So, it's all your fault you ilitarate Welsh git ;)

_________________
xxxx


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 07 May 2013 22:01 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
richie wrote:
So, it's all your fault you ilitarate Welsh git ;)



Ydw ;)

Where's Digger when you need him :?: ;) lOl

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 07 May 2013 22:14 
Offline
Mr. Tourettes
User avatar

Joined: 06 May 2009 13:51
Posts: 2450
Location: cambs
Adam wrote:
richie wrote:
So, it's all your fault you ilitarate Welsh git ;)



Ydw ;)

Where's Digger when you need him :?: ;) lOl


You walked right into that one m8.... :rotfl: ....and yes, I do beleive that the Diggers are still in the People's Republic of Yorkshire. The only third world country where you can still drink the water. lOl

ps. Without it tasting of sheep piss...

_________________
xxxx


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 08 May 2013 16:26 
Southerners like it here, there's plenty of them, and the waters better than anything you can get bottled.


Top
   
 Post subject: Re: AST Tuber shocks
PostPosted: 08 May 2013 21:19 
Offline

Joined: 22 Jul 2009 18:07
Posts: 125
Location: derbyshire
So how many miles has the ast done then Kev?


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 08 May 2013 23:12 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
Not sure exactly but i'd guess 30K max

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 09 May 2013 08:24 
Offline
User avatar

Joined: 07 Nov 2011 18:10
Posts: 4190
Current ride: Buell ulysses
Location: Telford
30k sound ok to me
With the state of the roads today that’s a lot of bouncy bouncy or compression and rebound and nothing last forever.
At a cost new of about £1000 divided by 30,000 km = just over 3 pence per km for having an AST sounds like good value for money :yup:

_________________
Buell Ulysses XB12X 06/08


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 09 May 2013 08:53 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
My Uly managed about 6k on the standard shock before it went pogo...

_________________
08 Specialized Langster


Top
 Post subject: Re: AST Tuber shocks
PostPosted: 09 May 2013 09:42 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
Muffin lasted over 30k on it's Showa before a huge pothole on the M25 popped it's seal it lasted just over 7 years .

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 15 posts ] 

All times are UTC


Who is online

Users browsing this forum: Bing [Bot] and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited