UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Stainless Brake Disc Bolts for S1
https://ukbeg.com/forum/viewtopic.php?f=8&t=16925
Page 1 of 1

Author:  cactus [ 08 May 2013 16:12 ]
Post subject:  Stainless Brake Disc Bolts for S1

Hello all, I'm back after sometime away from the forum due to near head bursting O.U. assignments over the winter. I'm looking for info regarding stainless brake disc bolts (front and rear) for my 1998 S1, I've searched the forum but can't find any relevant threads. I've contacted Black Bear, they were helpful with the other parts I've been after but they only have the standard zinc plated bolts. So, where will I be able to source stainless ones ? also if anyone has info about the exact size of these bolts I may be able to order them from Pro Bolt.

Author:  Maz [ 08 May 2013 16:16 ]
Post subject:  Re: Stainless Brake Disc Bolts for S1

NEVER, EVER use stainless fasteners for brake discs, calipers or any other stressed components :roll:

Author:  Adam [ 08 May 2013 16:44 ]
Post subject:  Re: Stainless Brake Disc Bolts for S1

:yt: It's virtually a banned material on home built aircraft. PFA Inspectors hate the stuff.

Good luck if you want Ti stuff from Pro Bolt, last time I enquired, they only did metric. IIRC S1 disc bolts are UNC.

Author:  cactus [ 08 May 2013 18:47 ]
Post subject:  Re: Stainless Brake Disc Bolts for S1

Maz wrote:
NEVER, EVER use stainless fasteners for brake discs, calipers or any other stressed components :roll:


Ok, well that's pretty definite, I'll bow to your superior knowledge. :worthy: I know Black Bear can supply the original bolts, I'll call them tomorrow.

Author:  pash [ 08 May 2013 19:03 ]
Post subject:  Re: Stainless Brake Disc Bolts for S1

Here's one for you...

viewtopic.php?p=154193#p154193

And Mr Tall was right...

http://www.pro-bolt.com/stainless-steel ... YqV1kqPex0

But I still think it's wrong...

Author:  rik [ 08 May 2013 20:53 ]
Post subject:  Re: Stainless Brake Disc Bolts for S1

I believe you can get chrome plated disc bolts from a HD dealer, seen them in DG20 in the past, sold as a set on a card, possibly Screaming Eagle...?

Author:  Maz [ 08 May 2013 21:00 ]
Post subject:  Re: Stainless Brake Disc Bolts for S1

:shock:

Author:  Adam [ 08 May 2013 22:19 ]
Post subject:  Re: Stainless Brake Disc Bolts for S1

rik wrote:
I believe you can get chrome plated disc bolts from a HD dealer, seen them in DG20 in the past, sold as a set on a card, possibly Screaming Eagle...?



Should send a set to Wandell, for his Golf cart lOl

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/