Anyone who owns a recent service manaual and could tell me the new trouble codes for DDFI-3 models?

These are the errors I'm looking for:

XB and 1125:
- Starter Relay
- Auxiliary Power Relay
- Neutral
- Clutch
- Active Intake Control
- Speed Sensor
- Idle Air Control

1125 only:
- Fan 2
- Crank sensor
- MAP sensor
- Baro sensor

Thanks!

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett

Got codes from a 2004 XB12s manual if that helps

Thanks a lot, but the pre-2008 models have installed only DDFI-2 ECM types.

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett

Not so simple with the 1125 as they have a different system of DTC ie. Starter relay is given a DTC of P0616 and a priority order of 61 for ''circuit low'' and a DTC of P0617, priority 60 for ''circuit high''

Fans are listed as left and right and have DTC of P0691>P0694 for high and low circuits and priority no.s 56>59.
Crank sensor has P0337>P0339 and P.O's of 7>9 for low, high and intermittent.
MAP is P0107/63 for low/open and P0108/62 for high.
Baro is P02228/24 for low and P2229/23 for high.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Thank you very much! I will update the XB codes then and keep the fake codes for the hellicon models, which is still sufficient to make software work.

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett