Yep the bit on the front wheel. Was making a nasty grindy squeely noise coming back from NABD rally. Took ages to suss it out. Was starting to imagine all sorts of things
.Pete
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Speedo drive 97'M2 https://ukbeg.com/forum/viewtopic.php?f=8&t=1945 |
Page 1 of 1 |
| Author: | keeper of stumpy [ 02 Aug 2009 19:07 ] |
| Post subject: | Speedo drive 97'M2 |
Mine's one the way out today. Anyone know whats the same or where to get a new one? Pete |
|
| Author: | s1nner [ 02 Aug 2009 19:35 ] |
| Post subject: | Re: Speedo drive 97'M2 |
assuming you mean the bit on the front wheel, then mine failed not so long ago ('98 S1) and I would imagine it is very much the same part. At that time Dr Maz advised: Maz wrote: I'd replace the drive.....47.80 + vat. Part no. is 67127-84A I was lucky enough to be at the end of Richie's generosity, and he sent me his unneeded on (from an M2, but I don't know the year). Thanks once again Richie, finally made the donation to Club funds by way of thankyou. HTH - Doug |
|
| Author: | Derek Putley [ 03 Aug 2009 23:16 ] |
| Post subject: | Re: Speedo drive 97'M2 |
wot s1nner said... I think you'll find some Sportster ones are slightly different mechanically, as the rolling diameters of the wheels vary between models... |
|
| Author: | keeper of stumpy [ 04 Aug 2009 19:34 ] |
| Post subject: | Re: Speedo drive 97'M2 |
Yep the bit on the front wheel. Was making a nasty grindy squeely noise coming back from NABD rally. Took ages to suss it out. Was starting to imagine all sorts of things .Pete |
|
| Author: | gusm2 [ 06 Aug 2009 20:25 ] |
| Post subject: | Re: Speedo drive 97'M2 |
I have an S3 drive I don't need, its yours for the postage, p.m your address if you still need one |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|