viewtopic.php?f=17&t=13
TPS reset
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Remapping my XB12S to smooth the control at low speeds https://ukbeg.com/forum/viewtopic.php?f=8&t=20752 |
Page 1 of 1 |
| Author: | nosamp [ 08 Sep 2015 23:24 ] |
| Post subject: | Remapping my XB12S to smooth the control at low speeds |
Hi, After reading various posts about the ECMSpy software I've decided that I don't have the experience, knowledge, confidence or a PC to do it! (I own a Mac). So I'd like to get someone else to do it for me. It's something I would like to have done as I've read it will stop the popping and banging that I get (assuming the exhaust is causing that) but mostly help for a smother ride when riding slow, in traffic for example it's hard not to look like I have kangaroo juice in it. I have been told by a couple of people Pash is the man to do it but according to Goggle maps he's 172 miles away so I was wondering is there anyone in Essex-ish who can too? A friend of mine has a friend at a Harley shop in Surrey (I think) and he said he would be able to do it but I'm a bit reluctant to let anyone do it unless they know exactly what they are doing and have done Buells before as I can live with it happily as it is rather than it get worse or feck it up! Any help suggestions welcome... Cheers Pete |
|
| Author: | pash [ 09 Sep 2015 07:05 ] |
| Post subject: | Re: Remapping my XB12S to smooth the control at low speeds |
Have you done a TPS reset? |
|
| Author: | Nutah [ 09 Sep 2015 11:18 ] |
| Post subject: | Re: Remapping my XB12S to smooth the control at low speeds |
viewtopic.php?f=17&t=13 TPS reset
|
|
| Author: | nosamp [ 10 Sep 2015 18:34 ] |
| Post subject: | Re: Remapping my XB12S to smooth the control at low speeds |
Thanks for the replys guys. Yeah I did see it (thanks for the link also), but it's stuff like this that's the reason I want someone who know's what they're doing to do it... "Warning - ECMSpy is a powerful tool. In inexperienced hands, it can result in your ECM being rendered useless." I'm not great when it comes to this kind of thing and I'd be gutted if I fudged it up!  This one I'd have a go at!  08 and later Buells The 08 and later have a completely different procedure and doesn’t need ECMSpy. Turn the ignition on, engine kill switch to run, twist the throttle 3 times - keep the throttle fully open for one second and fully closed for one second. |
|
| Author: | kevmean [ 10 Sep 2015 19:54 ] |
| Post subject: | Re: Remapping my XB12S to smooth the control at low speeds |
The TPS reset really is a very simple procedure , when you've done it or watched it being done you'll wonder why you even worried about it. |
|
| Author: | nosamp [ 10 Sep 2015 21:14 ] |
| Post subject: | Re: Remapping my XB12S to smooth the control at low speeds |
kevmean wrote: The TPS reset really is a very simple procedure , when you've done it or watched it being done you'll wonder why you even worried about it. I'm sure you're right I just still wouldn't trust myself to do it the first time.... |
|
| Author: | barney [ 10 Sep 2015 22:30 ] |
| Post subject: | Re: Remapping my XB12S to smooth the control at low speeds |
old software , but shows how easy it is https://youtu.be/i33__Qkvhn4 |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|