he wont struggle cos it aint possible
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| silencer replacement ? https://ukbeg.com/forum/viewtopic.php?f=8&t=20990 |
Page 1 of 1 |
| Author: | paulastbury [ 08 Dec 2015 06:24 ] |
| Post subject: | silencer replacement ? |
Hi, can someone please tell me what is the most suitable silencer replacement for my 2006 xb12x ulysses .Ease of fitment, valve cable, straps ect. Not too loud and where to purchase..Im might drop my original off at xmas and paint but have read may need to change front strap,where do I get them from...Love the bike. Many thanks Paul. |
|
| Author: | Adam [ 08 Dec 2015 12:06 ] |
| Post subject: | Re: silencer replacement ? |
By far the best quality are exhausts made by Albert (of this Parish) so you can send him a PM. Where abouts in Shropshire are you? |
|
| Author: | deepsix [ 08 Dec 2015 14:20 ] |
| Post subject: | Re: silencer replacement ? |
http://www.aph-performance-engineering.com/ Albert666 is aph-performance. you'll struggle to find a better pipe or bloke to make it for you.........viewtopic.php?f=8&t=4181&p=277645#p277645 |
|
| Author: | coco [ 08 Dec 2015 14:48 ] |
| Post subject: | Re: silencer replacement ? |
he wont struggle cos it aint possible
|
|
| Author: | paulastbury [ 08 Dec 2015 17:55 ] |
| Post subject: | Re: silencer replacement ? |
Adam wrote: By far the best quality are exhausts made by Albert (of this Parish) so you can send him a PM. Where abouts in Shropshire are you? Hi adam, Im in shawbury..if i can get away with tidying my exhaust with paint and on a closer inspection it's not too bad i will do that. Ill probably wait until xmas hols to drop exhaust..i have got access to powder coat but unsure about temps. I think powder cures at 200 degrees but dont know exhaust temps so might not work..Might have to save up some cash to buy new one. thanks paul. |
|
| Author: | paulastbury [ 08 Dec 2015 18:50 ] |
| Post subject: | Re: silencer replacement ? |
Hi thanks for replying, New to forum,not sure what all the buttons do yet. In xmas hols im going to drop exhaust, clean and paint. This will give me a good opportunity to inspect condition. . This may lead to me saving for a new one. I do have access to powder coat but unsure of temps. I think powder cures at 200 degree s but not sure what exhaust temp is. Has anyone tried it.? |
|
| Author: | barney [ 08 Dec 2015 19:20 ] |
| Post subject: | Re: silencer replacement ? |
Hello and welcome  I too have a xb12x 2006 model on an 08 plate  Do a search on here and have a read over xmass lots of info on mods and maintenance and areas to be aware of potential problems and fixes, connector 77 oil pump drive gear,free spirits tensioner |
|
| Author: | gibbsy [ 12 Dec 2015 16:12 ] |
| Post subject: | Re: silencer replacement ? |
I had a 2006 Ully with a Remus but it was fitted before I bought the bike so I can't tell you how much the bike benefited from it. I bought a 2008 Ully last year which had the standard exhaust on and I can tell you it was rubbish compared to the early Ully with the Remus. So I bought an APH this time and also changed the headers to the earlier larger type which yours will already have, the difference was immense compared to the standard pipe, the quality of the APH pipe is much better than the Remus and if you run with the removeable baffle in, the decibel level is also good. I would have an APH over any other pipe anytime |
|
| Author: | kernow60 [ 12 Dec 2015 23:56 ] |
| Post subject: | Re: silencer replacement ? |
gibbsy wrote: So I bought an APH this time and also changed the headers to the earlier larger type which yours will already have, the difference was immense compared to the standard pipe, the quality of the APH pipe is much better than the Remus and if you run with the removeable baffle in, the decibel level is also good. I would have an APH over any other pipe anytime Agree 100% , I also have just recently purchased a Albert for my Uly XT, top quality and so easy to fit. Delighted with the lovely deep sound which will probably only get better after a few hundred miles, from what I'm reading on here nothing much else comes close. 
|
|
| Author: | barney [ 13 Dec 2015 16:52 ] |
| Post subject: | Re: silencer replacement ? |
https://youtu.be/Ap8gqpr9Ap0 |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|