regcheeseman1 wrote:
I'm sure it's just how it is and not an actual fault
Shouldn't be like that. Wot Pash sed
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| snatchy pick up from idle https://ukbeg.com/forum/viewtopic.php?f=8&t=21821 |
Page 1 of 1 |
| Author: | regcheeseman1 [ 20 Sep 2016 16:20 ] |
| Post subject: | snatchy pick up from idle |
This may be an idiosyncrasy of the bike, or the injection or a large vee twin..... Right of idle, 1st and second gear, coasting with traffic and it starts to move and you just want to dial in a touch more power and it'll just lurch and surge. I'm sure it's just how it is and not an actual fault but I just wanted to check. I'm more used to pumper flatslide carbs and their heavy throttles so the Buell set up requires a level of finesse that I'm just not used to, perhaps the right hand needs recalibration. |
|
| Author: | pash [ 20 Sep 2016 16:30 ] |
| Post subject: | Re: snatchy pick up from idle |
TPS reset would be my first port of call. Check the How To section. |
|
| Author: | Tyrefryer [ 21 Sep 2016 10:40 ] |
| Post subject: | Re: snatchy pick up from idle |
Link: viewtopic.php?f=17&t=13 |
|
| Author: | Bonzo [ 21 Sep 2016 10:54 ] |
| Post subject: | Re: snatchy pick up from idle |
regcheeseman1 wrote: I'm sure it's just how it is and not an actual fault Shouldn't be like that. Wot Pash sed
|
|
| Author: | regcheeseman1 [ 21 Sep 2016 11:13 ] |
| Post subject: | Re: snatchy pick up from idle |
Bonzo wrote: regcheeseman1 wrote: I'm sure it's just how it is and not an actual fault Shouldn't be like that. Wot Pash sed It's not that bad, just not inline 4 smooth, I thought all big twins struggled a bit low down - but no harm in me trying TPS reset. I've bought the kit to make up 5 leads (minimum order quantity) - if anyone wants one? Downloaded ECMSPY 2.0 mono - will this do the job? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|