| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Coil connections https://ukbeg.com/forum/viewtopic.php?f=8&t=21978 |
Page 1 of 1 |
| Author: | Bonzo [ 20 Nov 2016 09:30 ] | ||
| Post subject: | Coil connections | ||
Broke down in the middle of nowhere last week (and I do mean that literally) and had to be trailered home. Finally traced the problem to a broken wire to the coil (if you look at the pink wire you can see a white bit where it's bust inside). Anyway, what do you call that type of connector, and more importantly, where can I get some from 
|
|||
| Author: | brother in buells [ 20 Nov 2016 10:00 ] |
| Post subject: | Re: Coil connections |
Stud connector socket or some type http://www.wiringdepot.com/store/p/189- ... 2-Pcs.aspx |
|
| Author: | Bonzo [ 20 Nov 2016 10:03 ] |
| Post subject: | Re: Coil connections |
|
|
| Author: | brother in buells [ 20 Nov 2016 10:13 ] |
| Post subject: | Re: Coil connections |
Maybe a ring connector with a nut works to ,if the wires are zip tied to the frame. |
|
| Author: | Bonzo [ 20 Nov 2016 10:15 ] |
| Post subject: | Re: Coil connections |
brother in buells wrote: Maybe a ring connector with a nut works to ,if the wires are zip tied to the frame. Good point, didn't think of that 
|
|
| Author: | Bonzo [ 22 Nov 2016 10:06 ] |
| Post subject: | Re: Coil connections |
Managed to chop off part of the plastic and solder it together, so it's running now. Ordered some replacements from the US via ebay. Took about an hour to find a US shop willing to post overseas. I don't suppose that's going to get any easier now 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|