M2L shock:
https://www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&aid=8475
(looks like the standard pre recall shock, as currently fitted to my S1
)
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| lower https://ukbeg.com/forum/viewtopic.php?f=8&t=22666 |
Page 1 of 1 |
| Author: | g6wgz [ 15 Sep 2017 00:35 ] |
| Post subject: | lower |
is there a shock that will drop the m2 to around 29" on the back. |
|
| Author: | gusm2 [ 15 Sep 2017 08:13 ] |
| Post subject: | Re: lower |
Not sure about the exact height but there was an M2L produced, I believe the shocker and the front mount were different, whether any parts may be available is another matter, I think also the seat may have been different too. It might be worth checking with AST suspension quite a few folks on here have used their shockers and have good reports |
|
| Author: | Bonzo [ 15 Sep 2017 08:33 ] |
| Post subject: | Re: lower |
M2L shock: https://www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&aid=8475 (looks like the standard pre recall shock, as currently fitted to my S1 )
|
|
| Author: | pash [ 15 Sep 2017 09:50 ] |
| Post subject: | Re: lower |
Martinwill of this parish has done as you wish to do. Maybe worth a PM... |
|
| Author: | Martinwill [ 15 Sep 2017 10:40 ] |
| Post subject: | Re: lower |
Yes, i had to lower my x1 due to my disability so i made an adjustable front shock mount. i'll dig out a photo if i can find it. |
|
| Author: | Martinwill [ 15 Sep 2017 11:02 ] | ||
| Post subject: | Re: lower | ||
adjustable front mount
|
|||
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|