UK Buell Enthusiasts Group
https://ukbeg.com/forum/

X1 silencer baffle
https://ukbeg.com/forum/viewtopic.php?f=8&t=22752		 Page 1 of 3
Author:  nigelbread [ 30 Oct 2017 14:02 ]
Post subject:  X1 silencer baffle
help! can not find any info regarding assembly of plates in silencer. bolts still there some parts missing?
thanks
found workshop manual any parts lists available?
Author:  nigelbread [ 30 Oct 2017 14:49 ]
Post subject:  Re: X1 silencer baffle
pro series. 3 screws to remove end, then one underneath for baffle .
6 bolts 3 missing ment to be holding together baffle assembly.
Author:  Maz [ 30 Oct 2017 15:03 ]
Post subject:  Re: X1 silencer baffle
It's not a Pro series, it's a supercrapp.
Author:  nigelbread [ 30 Oct 2017 15:28 ]
Post subject:  Re: X1 silencer baffle
thanks, on silencer says Buell pro series!

found super trap on discs. strange design going to restrict air flow.
Author:  nigelbread [ 30 Oct 2017 15:54 ]
Post subject:  Re: X1 silencer baffle
found info
http://www.supertrapp.com/product_secti ... =725-71235
http://www.supertrapp.com/images/pdfs/003-7235.pdf

this has closed end cap, some have hold drilled through?
Also open cap available, any thoughts.

thanks
Nigel.
Author:  Maz [ 30 Oct 2017 16:22 ]
Post subject:  Re: X1 silencer baffle
Yeah, throw it in the bin and buy a proper system !
Author:  gusm2 [ 30 Oct 2017 19:06 ]
Post subject:  Re: X1 silencer baffle
I recently bit the bullet and went full bifters on a set of Albert headers and a Pipewerx can and although the cost made me wince it looks, sounds and performs fuckin awesome...... Just my bawbee's worth though 😉
Author:  nigelbread [ 30 Oct 2017 19:59 ]
Post subject:  Re: X1 silencer baffle
gusm2 wrote:
I recently bit the bullet and went full bifters on a set of Albert headers and a Pipewerx can and although the cost made me wince it looks, sounds and performs fuckin awesome...... Just my bawbee's worth though 😉

Price?
Author:  Maz [ 30 Oct 2017 20:18 ]
Post subject:  Re: X1 silencer baffle
With a 'Maz header mount' parts will be circa £810.
Author:  Nutah [ 30 Oct 2017 20:41 ]
Post subject:  Re: X1 silencer baffle
or a Vance & Hines ?

Image
Author:  Maz [ 30 Oct 2017 20:46 ]
Post subject:  Re: X1 silencer baffle
:roll:
Author:  Adam [ 30 Oct 2017 21:26 ]
Post subject:  Re: X1 silencer baffle
gusm2 wrote:
I recently bit the bullet and went full bifters on a set of Albert headers and a Pipewerx can and although the cost made me wince it looks, sounds and performs fuckin awesome...... Just my bawbee's worth though 😉


Me too. It's all quality stuff 8-)
Author:  Adam [ 30 Oct 2017 21:28 ]
Post subject:  Re: X1 silencer baffle
I once had a Supertrapp, and it kept breaking :roll:
Author:  Nutah [ 30 Oct 2017 21:37 ]
Post subject:  Re: X1 silencer baffle
Maz wrote:
:roll:


:?:
Author:  Maz [ 30 Oct 2017 22:04 ]
Post subject:  Re: X1 silencer baffle
Sorry Don but the V+H is almost as bad as the supercrap and not even nearly in the same league as a full pro race system :)
Page 1 of 3 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/