Nice one Pash
Churchill
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Drive belt tension Wheel https://ukbeg.com/forum/viewtopic.php?f=8&t=22859 |
Page 1 of 1 |
| Author: | Desmond [ 22 Dec 2017 01:39 ] |
| Post subject: | Drive belt tension Wheel |
Hi, My drive belt tension wheel bearings have given up the ghost. Its an 06 Ulysses. Is there anywhere that does the bearings please ? Or would it be cheaper to replace the part? Cheers. |
|
| Author: | barney [ 22 Dec 2017 03:14 ] |
| Post subject: | Re: Drive belt tension Wheel |
viewtopic.php?f=17&t=819 |
|
| Author: | CHURCHILL [ 22 Dec 2017 09:14 ] |
| Post subject: | Re: Drive belt tension Wheel |
Hi, I have recently done this on my 08 Ulysses and followed the information posted by barney, the bearings I got from Simply Bearings [on line] I have also used BSL the main point is to use the ones indicated ie SKF Churchill |
|
| Author: | Desmond [ 22 Dec 2017 11:43 ] |
| Post subject: | Re: Drive belt tension Wheel |
Hi Boys thanks for your help. Churchill, you don't have the invoice number that Simply Bearings sent you do you, or the number on the Bearings ? I've rung em and they don't have a Spec' for this . Cheers Des. |
|
| Author: | pash [ 22 Dec 2017 12:19 ] |
| Post subject: | Re: Drive belt tension Wheel |
All the info you need is in that link... |
|
| Author: | pash [ 22 Dec 2017 12:23 ] |
| Post subject: | Re: Drive belt tension Wheel |
https://simplybearings.co.uk/shop/p6251 ... _info.html |
|
| Author: | CHURCHILL [ 22 Dec 2017 12:53 ] |
| Post subject: | Re: Drive belt tension Wheel |
| Nice one Pash Churchill |
|
| Author: | barney [ 23 Dec 2017 06:30 ] |
| Post subject: | Re: Drive belt tension Wheel |
" Later 9s, 12s and 1125s have two bearings in the pulleywheel, two single row 6203-2RSs each 17 x 40 x 12mm wide. It is best to check which bearing you need by reading the number off the seal/race prior to disassembly. Whatever you buy, you want the double sealed variety, i.e. 2RS (SKF) or RSR (FAG) " |
|
| Author: | Desmond [ 23 Dec 2017 10:45 ] |
| Post subject: | Re: Drive belt tension Wheel |
Thanks Fella's. I'm on it. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|