UK Buell Enthusiasts Group
https://ukbeg.com/forum/

M2 FORK SPRING SPACER
https://ukbeg.com/forum/viewtopic.php?f=8&t=22976		 Page 1 of 1
Author:  a10ken [ 27 Feb 2018 10:46 ]
Post subject:  M2 FORK SPRING SPACER
hi folks, not been on here for many a moon but i am putting my m2 back on the road, when i went to replace the fork oil i noticed that the tube spacer (item 4 in the manual) that should sit on top of the spring is missing?? (the original owner had the forks rebuilt by the some tuning shop down south years ago) could anyone please give me the dimensions of this so i can get a pair made up in work.
thanks in advance
ken
Author:  nigelbread [ 27 Feb 2018 12:20 ]
Post subject:  Re: M2 FORK SPRING SPACER
out of curiosity has it been placed under the spring?
Also if they worked before why alter them, and is it a longer non-standard spring.

If it aint broken why fix it!
Author:  a10ken [ 27 Feb 2018 13:34 ]
Post subject:  Re: M2 FORK SPRING SPACER
hi nigelbread, no they are not under the spring, don,t know if the spring is longer than std only that it has 09(or 60?) laser etched on the upper face, when the spring is fitted there is a 25mm+ gap before the washer and locating cup, forks worked ok previously just noticed they were missing when i opened them up??
Author:  a10ken [ 03 Mar 2018 13:42 ]
Post subject:  Re: M2 FORK SPRING SPACER
all sorted thanks to MAZ.
spacer dims are 40mm x 37 x 1
springs are 90 newton ohlins at 340mm.
ta MAZ :worthy:
Author:  Bonzo [ 04 Mar 2018 09:38 ]
Post subject:  Re: M2 FORK SPRING SPACER
a10ken wrote:
springs are 90 newton ohlins at 340mm.


:shock: Don't tell me I need another set of conversion factors :sad1:
Author:  a10ken [ 05 Mar 2018 08:29 ]
Post subject:  Re: M2 FORK SPRING SPACER
will need to look that one up myself??
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/