ferreteer wrote:
I bet most of you didn't even know you had one!
I didn't, so can't help I'm afraid
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| seized rollover valve https://ukbeg.com/forum/viewtopic.php?f=8&t=23094 |
Page 1 of 1 |
| Author: | ferreteer [ 23 Apr 2018 11:56 ] |
| Post subject: | seized rollover valve |
I bet most of you didn't even know you had one! Elusive fuel starvation on my M2 that got worse last week forcing a 50mph trundle home eventually led me to pulling out this little black ballcock out of the tank. no amount of bashing on the bench would get it to work effectively so I put it in the lathe and turned the bottom out enough to get the steel ball out and drill out the valve/spring in the hope that leaving most of it in place will produce a little baffling. So.... If any of you have had this issue do you run your bike without one? got a generic inline one or bought a gen in-tank replacement? |
|
| Author: | Bonzo [ 23 Apr 2018 12:00 ] |
| Post subject: | Re: seized rollover valve |
ferreteer wrote: I bet most of you didn't even know you had one! I didn't, so can't help I'm afraid
|
|
| Author: | pash [ 23 Apr 2018 12:01 ] |
| Post subject: | Re: seized rollover valve |
I had the same on my S1, ended blowing back through it and shaking it and it came back to life. |
|
| Author: | ferreteer [ 23 Apr 2018 12:11 ] |
| Post subject: | Re: seized rollover valve |
pash wrote: I had the same on my S1, ended blowing back through it and shaking it and it came back to life. Oh I tried believe me! I bet you a middlesborough hooker couldn't have sucked this bugger back to life! |
|
| Author: | Nutah [ 23 Apr 2018 15:58 ] |
| Post subject: | Re: seized rollover valve |
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|