Anyone no were I can get in UK front calliper rebuild kit cheers ( or help why brakes are not coming of properly heating disc up cheers

Riders of Bristol. Mention UKBEG for a 13% discount...

_________________
08 Specialized Langster

have you tried cleaning the pistons around with a toothbrush & brake cleaner

_________________
Feros Ferio

Check the return port in the master cylinder.....does the bike have non standard lever ?......I wouldn't be riding it again until this is sorted !

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

A lot of aftermarket levers don't allow the piston in the M/Cyl to come back far enough. Never trust what sellers say on Ebay!

_________________
If your dreams don't scare you, they are not big enough.

Happened to a friend over here when he put shorty levers on, he ground to a halt halfway through a tunnel, with a glowing front disc.

_________________
Wear the fox hat

I had levers like that fitted for me once by a local 'expert', ground to a halt on a very busy dual carriageway, unable to move it backwards or forwards. Fortunately I was riding with a friend who realised I wasn't behind him and came screaming back to find out what had happened. Luckily I had the original levers stuffed down my jacket (throw nothing away, me ) and he refitted them at the roadside for me!

_________________
Valencia Orange XB12Scg - serviced by Maz 2018
Black P3 Blast - serviced by Maz and fixed by Maz in 2019

The same thing happened to me the first time I tried the bike after buying it. The previous owner said he only rode the bike once and didnt like it,I now know why. With help from Maz the heel part of the lever was found to be the culprit.