UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Damaged Oil Plug Thread
https://ukbeg.com/forum/viewtopic.php?f=8&t=23164		 Page 1 of 1
Author:  Popeye [ 21 May 2018 22:31 ]
Post subject:  Damaged Oil Plug Thread
Hello,

Based in London and happy owner of a Buell XB12SX since 2010. :mrgreen:

My mistake: I believe the plug was tighten too hard during the last oil change. I am pretty sure the thread is damaged, and I fear it may come with the plug next time I unscrew it. :headbang:

The oil needs to be changed now and I am looking for a garage which could fit an insert (TIME-SERT 1/2 - 20 SAE Drain Plug).

I already have the insert kit and I prefer an insert to drilling and threading at a larger diameter or to any sort of Helicoil solution.

Could you recommend a garage in particular in London for such repairs?

I live nearby Jap and German Motorcycle in Bermondsey but don’t know whether they could assist.

Many thanks
Ben
Author:  Nutah [ 22 May 2018 11:15 ]
Post subject:  Re: Damaged Oil Plug Thread
:shock:
any competent mechanic should be able to do that.
dont know the area sorry
good luck Ben :yup:
welcome to the forum
Author:  Bonzo [ 22 May 2018 11:17 ]
Post subject:  Re: Damaged Oil Plug Thread
Popeye wrote:
My mistake: I believe the plug was tighten too hard during the last oil change


IIRC the manual has the wrong torque setting in it.

edit - just looked in my old manual, it says 26-29 ft/lb, but I've scribbled 15 ft/lb MAX next to it :P
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/