viewtopic.php?f=7&t=23176
get one of these , than you can look at it in situ.
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| 2006 XB12 Oil drive gear inspection https://ukbeg.com/forum/viewtopic.php?f=8&t=23231 |
Page 1 of 1 |
| Author: | D+S [ 20 Jun 2018 10:37 ] |
| Post subject: | 2006 XB12 Oil drive gear inspection |
Two questions, one, exactly what do I remove to inspect the oil pump drive gear, I now have 20k on the bike and this is the time to inspect for the bronze or steel drive gear. If it needs a bronze gear can I fit it myself or does it need bearing pullers, engine out, heads off in other words a specialist mechanic or just an amateur, namely me. |
|
| Author: | chopperneil [ 20 Jun 2018 10:49 ] |
| Post subject: | Re: 2006 XB12 Oil drive gear inspection |
https://www.twinmotorcycles.nl/artikelen.asp?cid=18&aid=620 everything you need to know about inspecting and replacing if necessary |
|
| Author: | Nutah [ 20 Jun 2018 11:05 ] |
| Post subject: | Re: 2006 XB12 Oil drive gear inspection |
viewtopic.php?f=7&t=23176 get one of these , than you can look at it in situ. |
|
| Author: | D+S [ 23 Jun 2018 11:20 ] |
| Post subject: | Re: 2006 XB12 Oil drive gear inspection |
Thanks guys. I bought the endoscope thing, that bit i can handle. Looked at the twin motorcycle article and decided not to tackle that on my own but help is at hand if the job is required. still hopeful that a bronze one lurks deep in my engines |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|